Icom IC-R8500 Instruction Manual - Page 41

Optional Installations

Get Icom IC-R8500 PDF manuals and user guides View all Icom IC-R8500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

12 OPTIONAL INSTALLATIONS s UT-102 VOICE SYNTHESIZER UNIT The UT-102 announces the accessed frequency in a clear, electronically generated voice, in English (or Japanese) when pushing [SPCH] or when a signal is detected during scan (see p. 31, 32 for settings). Œ Remove the top cover as shown opposite.  Remove the protected paper attached to the bot- tom of the UT-102 to expose the adhesive strip. Ž Connect the UT-102 as shown in the diagram at right.  Replace the top cover. Under the top cover UT-102 J12 s FL-52A CW NARROW FILTER The IC-R8500 has a CW narrow mode which provides better S/N (signal-to-noise) and also rejects nearby interference. The CW narrow filter is helpful when receiving CW and radio-teletype signals. Œ Remove the top cover as shown opposite.  Connect the FL-52A as shown in the diagram at right. • Make sure it is connected in the proper orientation. • Attached nuts on the FL-52A are not necessary. If you want to install the filter more securely, open the MAIN unit, then use the nuts on the bottom of the MAIN unit. Ž Replace the top cover. Under the top cover FL-52A

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
12
OPTIONAL INSTALLATIONS
■
UT-102
VOICE SYNTHESIZER UNIT
The UT-102 announces the accessed frequency in a
clear, electronically generated voice, in English (or
Japanese) when pushing [SPCH] or when a signal is
detected during scan (see p. 31, 32 for settings).
Remove the top cover as shown opposite.
Remove the protected paper attached to the bot-
tom of the UT-102 to expose the adhesive strip.
Connect the UT-102 as shown in the diagram at
right.
Replace the top cover.
J12
UT-102
■
FL-52A
CW NARROW FILTER
The IC-R8500 has a CW narrow mode which pro-
vides better S/N (signal-to-noise) and also rejects
nearby interference. The CW narrow filter is helpful
when receiving CW and radio-teletype signals.
Remove the top cover as shown opposite.
Connect the FL-52A as shown in the diagram at
right.
• Make sure it is connected in the proper orientation.
•Attached nuts on the FL-52A are not necessary. If you
want to install the filter more securely, open the MAIN
unit, then use the nuts on the bottom of the MAIN unit.
Replace the top cover.
FL-52A
Under the top cover
Under the top cover