Icom IC-V10MR Operating Guide - Page 21

4 USER SET MODE User Set Mode items Beep Turns the key-touch beeps ON or OFF. Beep Level Sets the beep and announce output level. •• Range: 1 ~ 5, or 1 (Linked) ~ 5 (Linked) When setting the Linked option, the beep level is adjustable with [VOL]. Ringer Level Sets the Ringer output level. •• Range: 1 ~ 5, or 1 (Linked) ~ 5 (Linked) When setting the Linked option, the ringer level is adjustable with [VOL]. SQL Level (Squelch Level) Sets the squelch level. •• Range: 0 (open) ~ 9 (tight) AF Min Level (AF Minimum Level) Sets the minimum audio output level. This function determines the minimum audio output level to not let the audio level become lower than the set level. •• Range: 0 ~ 255 Mic Gain (Microphone Gain) Sets the microphone sensitivity. •• Range: 1 (low sensitivity) ~ 4 (high sensitivity) VOX Turns the VOX function ON or OFF. NOTE: To use the function, a headset and a VOX converter cable are required (purchase separately). VOX Gain Sets the VOX gain. The VOX function automatically switches between receive and transmit by detecting sounds. Higher values make the VOX function more sensitive to sounds. •• Range: 1 ~ 10 VOX Delay (Sec) Sets the period of time the transceiver continues transmitting after the user stops speaking, and then the VOX switches to receive. •• Range: 0.5 ~ 3.0 seconds Signal Moni (Signal Monitor) Sets whether or not to release the mute while using a 2-Tone or DTMF code signaling. •• OFF: T he mute status is kept (Inaudible) even when pushing [Moni *2]. •• ON: The mute is released (Audible) when pushing [Moni *2]. Lone Worker Sets whether or not to automatically enter the Emergency mode when no operation occurs during the set period of time. 4-3