Icom IC-V10MR Operating Guide - Page 24

4 USER SET MODE User setting operation DDSetting the microphone gain The higher value makes the microphone more sensitive to the user's voice. NOTE: The Beep function should be ON. 1. Rotate [VOL] to turn OFF the transceiver. 2. Set [Rotary Selector] to Channel 16. 3. While holding down [Upper], rotate [VOL] to turn ON the transceiver and enter the microphone gain adjustment mode. 4. Push [Upper] to increase, or push [Lower] to decrease the microphone gain. LLThe adjustable range is between 1 (low sensitivity) to 4 (high sensitivity). •• A beep sounds after pushing [Upper] or [Lower]. An error beep sounds when the settable range is exceeded. 5. Rotate [VOL] to turn OFF the transceiver, then turn it ON again to restart the normal operation. DDSetting the VOX function The VOX function can be turned ON or OFF. The VOX function automatically switches between receive and transmit during voice operation. NOTE: The Beep function should be ON. 1. Rotate [VOL] to turn OFF the transceiver. 2. Set [Rotary Selector] to any channel other than Channel 16. 3. While holding down [PTT] and [Upper], rotate [VOL] to turn ON the transceiver and turn the VOX function ON or OFF. •• A beep sounds when the VOX function is OFF, or two beeps sound when the VOX function is ON. 4. Rotate [VOL] to turn OFF the transceiver, then turn it ON again to restart the normal operation. DDSetting the VOX gain The higher value makes the VOX function more sensitive to the user's voice. NOTE: The Beep function should be ON. 1. Rotate [VOL] to turn OFF the transceiver. 2. Set [Rotary Selector] to Channel 16. 3. While holding down [PTT] and [Upper], rotate [VOL] to turn ON the transceiver and turn the VOX function ON or OFF. LLThe adjustable range is between 1 (low sensitivity) to 4 (high sensitivity). •• A beep sounds after pushing [Upper] or [Lower]. An error beep sounds when the settable range is exceeded. 4. Rotate [VOL] to turn OFF the transceiver, then turn it ON again to restart the normal operation. 4-6