Icom IC-V10MR Operating Guide - Page 22
Stationary Sens, Motion Sens, Lone Worker ON Timer: 1 minute
View all Icom IC-V10MR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
4 USER SET MODE User Set Mode items Stationary Sens (Stationary Sensitivity) Set the acceleration sensor sensitivity to detect if the user is stationary or not. This setting is used for the Lone Worker function, and it determines the acceleration threshold level to activate the Lone Worker ON Timer. •• Range: 1 (low sensitivity) ~ 3 (high sensitivity) LLIf you set at a lower level, the transceiver will enter the Emergency mode more easily. (Example) •• Lone Worker ON Timer: 1 minute •• Stationary Sens: 2 Motion Sens (Motion Sensitivity) Set the acceleration sensor sensitivity to detect if the user is moving or not. This setting is used for the Motion Detection function, and it determines the acceleration threshold level to activate the Motion Detection Timer. •• Range: 1 (low sensitivity) ~ 3 (high sensitivity) LLIf you set at a higher level, the transceiver will enter the Emergency mode more easily. (Example) •• Motion Detection Timer: 10 seconds •• Motion Sens: 1 4-4