Icom IP730D Instruction Manual - Page 24

5 OTHER FUNCTIONS Using a Bluetooth® device (Continued) DDPairing with a Bluetooth device This is an example of connecting the transceiver to a VS-3 Bluetooth headset. 1. Entering the VS-3 Pairing mode 1. Confirm the VS-3 is turned OFF. 2. Hold down [PWR] for 6 seconds. ••The indicator quickly blinks red then blue, and then the headset enters the Pairing mode. NOTE: ••Charge the VS-3 before operating. ••The VS-3 starts up in the Pairing mode when its Bluetooth function is ON, but no bluetooth device is entered in its Pairing list. 2. Enable the transceiver's Bluetooth function 1. Turn OFF the transceiver, if it is turned ON. 2. While holding down [FUNC], rotate [VOL] to turn ON the transceiver. ••The Set Mode is displayed. LLRelease [FUNC] when "SET MODE" is displayed. 3. Rotate Rotary Selector or push [▲] or [▼] to select an item group "Common," and then push [FUNC]. 4. Push [FUNC] or [Address] several times to select "Bluetooth." 5. Rotate Rotary Selector or push [▲] or [▼] to select "ON." 3. Pairing and connecting the Bluetooth device 1. Push [FUNC] several times to select "Search BT Device" in the Set mode, and then push [Call History]. ••The transceiver searches for a Bluetooth device. LLPush [CLR/Lock] to cancel searching. ••If found, the device's name and BD address are displayed on the screen. (Example: ICOM BT-002) SET Bluetooth ON SET Search BT Device ICOM BT-002 2. Push [▲] or [▼] to select the headset to pair and connect, and then push [Call History]. ••"Connect" is displayed when the pairing has completed. 3. Push [CLR/Lock] to exit "Search BT Device." LLPush [CLR/Lock] again to exit the Set mode and return to the Standby screen. ••" " is displayed if the headset has correctly paired. DDSettings for the Bluetooth function You can customize the transceiver's Bluetooth settings in the Set mode. See the Set mode section for details. SET Search BT Device Connect 5-3