Icom IP730D Instruction Manual - Page 28

5 OTHER FUNCTIONS Using the Emergency Call function (Continued) The transceiver enters the Emergency mode through the following functions, depending on a presetting: D The Lone Worker function When no operation occurs for the ON Timer preset time� L If a user pushes any key before the Reminder Timer set time expires, the Emergency mode is canceled� Enters the Emergency mode. Sends an Emergency call. ON Timer Reminder Timer Emergency Timer [PTT] [PTT] [PTT] [KEY] No operation is detected. Time If pushing any key during Reminder Timer, the Emergency mode is canceled. Lone Worker With Stationary: • When no operation occurs for the ON Timer preset time� AND • The transceiver is detected as stationary (no motion) for the ON Timer set time� L If a user pushes any key, or moves the transceiver before the Reminder Timer set time expires, the Emergency mode is canceled� Example: • ON Timer: 60 minutes • Reminder Timer: 60 seconds Enters the Emergency mode. Sends an Emergency call. ON Timer Reminder Timer Emergency Timer No motion is detected. [PTT] No operation is detected. [KEY] Stationary Sensitivity If moving during the Reminder Timer, the Emergency mode is canceled. Operation Operation Acceleration Time If pushing any key during the Reminder Timer, the Emergency mode is canceled. NOTE: The Lone Worker function may not properly work, depending on the surrounding environment such as obstructions, weather condition, and so on� Icom is not responsible for the destruction or damage caused by using the Lone Worker function� 5-7