Insignia NS-37L550A11 User Manual (English) - Page 18

NS-32L_37L_42L550A11_09-1120_MAN_V2_English.book Page 14 Thursday, January 21, 2010 10:20 AM NS-32L550A11/NS-37L550A11/NS-42L550A11 32"/37"/42" LCD, 120 Hz 1080p 2 Follow your universal remote control's instructions to enter the TV code you found in Step 1. Tips • If your universal remote control has a code search feature, run a code search to identify a code that matches your TV. See your universal remote control's instructions for details. • If your universal remote control has a "Learn" feature, you can manually program it using the Insignia TV remote to "teach" the commands one at a time. See your universal remote control's instructions for details. 3 If all else fails, you must use a different universal remote control that can operate both your set-top box and your TV. Four such remotes are listed on the chart, but many other compatible models are available in the market. For more help, go to insigniaproducts.com or call technical support for your universal remote control or set-top box manufacturer, or call the Insignia Customer Care Center. For US and Canada markets, call 1-877-467-4289. For Mexico markets, call 01 800-926-3000. Making connections Connecting the power To connect the power: • Plug the power cord into the AC IN jack on the back of your TV, then plug the other end of the cord into a power outlet. Connecting an antenna or cable TV (no box) To connect an antenna or cable TV (no box): 1 Turn off your TV and all connected equipment. 2 Connect a coaxial cable to the ANT/CABLE IN jack on the back of your TV and to the antenna or cable TV wall jack. Connecting a cable or satellite box Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best connection type available. Connection type Video quality HDMI Best Component Better than composite, S-Video, or coaxial S-Video Better than composite or coaxial Composite Better than coaxial Coaxial Good To connect a cable or satellite box: 1 Connect the incoming cable from the cable TV or satellite TV wall jack to the cable-in jack on the cable box. HDMI Composite S-Video Component ANT/CABLE IN Notes • • • Use a coaxial cable to eliminate interference and noise from radio waves. Do not bundle the coaxial cable with the power cord or other cables. If the antenna is not installed correctly, contact qualified service personnel to correct the problem. 2 Depending on the jacks available on the cable or satellite TV box, connect a cable from the outgoing jacks on the cable or satellite TV box to the corresponding jacks on the back or side of your TV. The connection can be to an HDMI jack, COMPONENT Y/PB/PR jacks, AV IN S-VIDEO, or AV IN VIDEO jack. 14 www.insigniaproducts.com