Insignia NS-55L260A13 User Manual (English) - Page 16

NS-55L260A13 Insignia 55" 1080p LCD TV Using composite video (good) To connect a cable or satellite box using composite video: 1 Make sure that your TV's power cord is unplugged, and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect an AV cable (not provided) to the AV IN VIDEO jack and AV IN L /R audio jacks on the side of your TV and to the composite video and audio out jacks on the cable or satellite box. Note When you connect the audio using the AV IN L/R audio jacks, the audio output is analog. Cables are often color-coded to match color-coded jacks. Side of TV Using coaxial (good) To connect a cable or satellite box using coaxial: 1 Make sure that your TV's power cord is unplugged, and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect a coaxial cable (not provided) to the ANT/CABLE jack on the side of your TV and to the coaxial out jack on the cable or satellite box. Side of TV Coaxial cable Cable or satellite box AV cable Cable or satellite box 4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 5 Go through the Setup Wizard on page 20. 4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 5 Go through the Setup Wizard on page 20. Notes • • Use a coaxial cable to eliminate interference and noise from radio waves. Do not bundle the coaxial cable with the power cord or other cables. 12 www.insigniaproducts.com