Insignia NS-59P680A12 User Manual (English) - Page 9

Installing a wall-mount bracket Warning This apparatus is intended to be supported by a UL Listed wall-mount bracket. To install a wall-mount bracket: Warning These servicing instructions are for use by qualified service personnel only. To reduce the risk of hazards, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. 1 If the stand is installed, remove the stand. 2 Attach the wall-mount bracket to the back of your TV using four M8 screws (not included). Note The length of the wall-mount screws vary depending on the wall-mount bracket you purchased. See the instructions that came with the wall-mount bracket for screw lengths. TV components Accessories Make sure that the following accessories are provided in the packaging: Accessories Remote control with two AAA batteries Power cord Ferrite core Warnings • Make sure that you use M8 screws. Screws with other dimensions may cause damage to the inside of your TV. • For wall mounts that do not comply with the VESA standard screw specifications, the length of the required screws may differ. Do not use screws that do not comply with the VESA standard screw specifications. • Do not exceed a 15° tilt when mounting your TV. M4 X L12 screws (4) M4 X L8 screws (4) Cleaning cloth Important Information Document and Quick Setup Guide Cleaning cloth The cleaning cloth is for cleaning the TV screen only. Do not use the cleaning cloth to clean any other part of your TV. www.insigniaproducts.com 5