Insignia NS-R5100 User Manual (English) - Page 10

Connecting speakers Front right Front left Center Insignia NS-R5100 AV Digital Home Theater Receiver Connecting headphones Surround Surround right left Caution Use speakers with an impedance of 6 Ω or more. Caution Do not let the bare speaker wires touch each other or any metal part of this receiver. Doing so may damage the receiver or speaker. Note Before connecting the speakers, refer to "Locating your speakers" on page 5. To connect your speakers: • Connect your speaker cables to the receiver. Be sure to connect the speakers firmly and correctly according to the channel (left and right) and the polarity (+ and -). If you do not make the connections correctly, you will not hear any sounds from the speakers. If the sound is unnatural and lacks bass, the speaker polarity is incorrect. After installing the speakers, adjust the speaker settings according to your environment and speaker layout. For more information, see "Modifying the speaker settings" on page 19. To connect your headphones: • Insert the headphone plug into the headphone jack on the receiver. Notes • To hear sound from the headphones, make sure the SPEAKER button is set to off. • When listening to a DTS or Dolby Digital program source, if the headphones are plugged in and the SPEAKER button is set to off, the receiver enters the 2CH downmix mode automatically. For more information, see "2CH downmix mode" on page 13. • When EXTERNAL IN is selected as an input source, only the front left and front right channel signals can be reproduced through the headphones. Connecting the power To connect your receiver to power: • Plug the power cord into an AC outlet. Installing batteries Caution Do not use Ni-Cd rechargeable batteries in this remote control. To install the batteries: 1 Remove the cover. 8 www.insignia-products.com