Insignia NSHT511 User Manual (English) - Page 16

To mount the center speaker horizontally, use the two keyhole slots shown to hang each speaker on two screws that are securely screwed into the wall. Cautions • A mounting screw's ability to support a speaker depends on how well it's anchored to the wall. If you have hollow walls, screw each mounting screw into a stud. If there are no studs, or the walls are solid, use suitable wall anchors. • Use screws with a head diameter of 5/16" (9 mm) or less and a shank diameter of 1/8" (4 mm) or less. With hollow walls, use a cable/pipe detector to check for any power cables or water pipes before making any holes. • Leave a gap of between 3/16" (5 mm) and 7/16" (10 mm) between the wall and the base of the screw head. (We recommend that you consult a home installation professional.) AV Recording Audio sources can be recorded to a recorder (such as a cassette deck, CD-R, MD [MiniDisc]) connected to the VCR OUT jacks. Video sources can be recorded to a video recorder (such as a VCR or DVD recorder) connected to the VCR/DVR Out jack. Insignia NS-HT511 Home Theater System To record the audio from one source input and the video from another source input Camcorder CD player VCR VCRV, DCVDRre,coDrdVer,Dcasrseettceotarpdeederc,k, CDRc, MaDsrseceortdteer, atnadpsiemildare. ck, L R AUDIO IN VIDEO IN To record an audio source: 1 Use the input selector buttons to select the source that you want to record. You can watch the source while recording. The receiver's MASTER VOLUME control has no effect on recording. 2 Start recording on your recorder. 3 On the source component, start playback. If you select another input source during recording, that input source is recorded. Recording Separate AV Sources You can record audio and video from completely separate sources, allowing you to overdub audio onto your video recordings. This function takes advantage of the fact that when an audio-only input source (TV/CD) is selected, the video input source remains unchanged. In the following example, audio from the CD player connected to the TV/CD IN jack and video from the camcorder connected to the AUX INPUT VIDEO jack are recorded by the VCR connected to the VCR/DVR OUT jacks. : Video signal : Audio signal To record separate AV sources: 1 Prepare the camcorder and CD player for playback and the VCR for recording. 2 Press the AUX input selector. 3 Press the TV/CD input selector. This selects the CD player as the audio source, but leaves the camcorder as the video source. 4 Start recording on the VCR and start playback on the camcorder and CD player. The video from the camcorder and the audio from the CD player are recorded by the VCR. Rocketboost Setup Rocketboost™ is expandable wireless digital audio. • Products with Rocketboost™ technology let you easily expand your listening experience throughout your home. • Rocketboost™ does not interfere with other wireless products in your home. • Rocketboost™ is uncompressed digital audio compatible with all audio formats like Dolby TrueHD and DTS-HD Master Audio used with Blu-ray. When you see the Rocketboost logo on any product, it has been designed to work with other Rocketboost products, no matter who manufactures them. 12 www.insigniaproducts.com