Insignia NSHT511 User Manual (English) - Page 30

Insignia NS-HT511 Home Theater System Setting the A/V Sync When using progressive scanning on your Blu-ray Disc/DVD player, you may find that the picture and sound are out of sync. With this setting, you can correct this by delaying the audio signals. Option settings are from -400 ms to 400 ms, in 10 ms steps. Notes • • A/V Sync is disabled when the Direct listening mode is used with an analog input source. The setting is stored individually for each input selector. Naming inputs (Name Edit menu) You can enter a preset name for each individual input selector for easy identification. When entered, the preset name appears on the display. Before selecting a name, press the input selector to select the input source to name. Submenu Name Edit Options - - -, Blu-ray, DVD, HD DVD, VCR, DVR, Tivo, CableSTB, SAT STB, PS3, Wii, Xbox, PC, TV, CD, TAPE, and iPod. To reset to the default, select - - -. Notes • • Two different inputs cannot have the same name. This menu cannot be used for the TUNER input selector. Setting the Audio Selector You can set priorities of audio output when there are both digital and analog inputs. Options include: • ARC-The audio signal from your TV tuner can be sent digitally to the HDMI OUT of the receiver. With this selection, the TV's audio can automatically be selected as a priority. • HDMI-This can be selected when HDMI IN has been assigned as an input source. If both HDMI (HDMI IN) and digital audio inputs (COAXIAL IN or OPTICAL IN) have been assigned, HDMI input is automatically selected. • COAX-This can be selected when COAXIAL IN has been assigned as an input source. If both coaxial and optical inputs have been assigned, coaxial input is automatically selected. • OPT-This can be selected when OPTICAL IN has been assigned as an input source. • Analog-The receiver always outputs analog signals. Notes • • • The setting is stored individually for each input selector. This setting can be made only for the input source that is assigned as HDMI IN, COAXIAL IN, or OPTICAL IN. If both HDMI (HDMI IN) and digital audio inputs (COAXIAL IN or OPTICAL IN) are assigned, HDMI input is selected as a priority by setting to ARC. To select the digital audio input, see "Setting up Digital Audio (Digital Audio menu)" on page 22. You can select ARC if you select the TV/CD input selector. But you cannot select it if you have selected Off in the Audio Return Ch setting. Selecting a digital input signal format (Fixed Mode) The digital input signal formats are available only for the input sources that you have assigned a digital input jack. Normally, the receiver detects the signal format automatically. However, if you experience any issues when playing PCM or DTS material, you can manually set the signal format to PCM or DTS. Notes • • • • If the beginnings of tracks from a PCM source are cut off, try setting the format to PCM. If noise is produced when fast forwarding or reversing a DTS CD, try setting the format to DTS. The setting is stored individually for each input selector. The setting is reset to Off when you change the setting in the Audio Selector. • Off-The format is detected automatically. If no digital input signal is present, the corresponding analog input is used instead. • PCM-Only 2-channel PCM format input signals are heard. If the input signal is not PCM, the PCM indicator flashes and noise may also be produced. • DTS-Only DTS (but not DTS-HD) format input signals is heard. If the input signal is not DTS, the DTS indicator flashes and there is no sound. OSD Setting Volume OSD • On • Off Select On when you want to display the volume level on-screen when it is adjusted. Auto Standby Auto Standby • On • Off When Auto Standby is set to On, the Surround Sound Receiver automatically returns to Standby when no audio or video signal is received for 30 minutes. Note The Auto Standby function may activate during playback of some source. 26 www.insigniaproducts.com