Intel D845GVFN Product Specification - Page 19
System Memory - ram
View all Intel D845GVFN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Product Description 1.7 System Memory The Desktop Board D845GVFN has two DIMM sockets and supports the following memory features: • 2.5 V (only) 184-pin DDR SDRAM DIMMs with gold-plated contacts • Unbuffered single-sided or double-sided DIMMs • Maximum total system memory: 2 GB; minimum total system memory: 64 MB • DDR333/266/200 MHz SDRAM DIMMs only • Serial Presence Detect (SPD) • Suspend to RAM Table 4 lists the supported system bus frequency and memory speed combinations. Table 4. Supported System Bus Frequency and Memory Speed Combinations If the processor's system bus frequency is... You can use this type of DIMM... 533 MHz DDR333 or DDR266 400 MHz DDR266 or DDR200 CAUTION Do not use ECC DIMMs with this board. Using ECC DIMMs could damage the board. INTEGRATOR'S NOTES • Registered DIMMs are not supported. • Double-sided x16 DIMMs are not supported. NOTE To be fully compliant with all applicable DDR SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. This allows the BIOS to read the SPD data and program the chipset to accurately configure memory settings for optimum performance. For information about Obtaining DDR SDRAM specifications Obtaining the PC Serial Presence Detect (SPD) Specification Refer to Section 1.5, page 15 Section 1.5, page 15 19