Intel D845HV Intel Desktop Board D845HV Specification Update - Page 14
Support For Additional Intel, Pentium, Processors
View all Intel D845HV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Intel Desktop Board D845HV Specification Update ✏ NOTE Use only ATX12V- or SFX12V-compliant power supplies with the D845HV and D845WN boards. ATX12V and SFX12V power supplies have an additional power lead that provides required supplemental power for the Intel® Pentium® 4 processor. Always connect the 20-pin and 4-pin leads of ATX12V and SFX12V power supplies to the corresponding connectors on the D845HV and D845WN boards, otherwise the board will not boot. Do not use a standard ATX power supply. The board will not boot with a standard ATX power supply. For information about Processor support Processor usage Power supply connectors Refer to Section 1.3, page 17 Section 1.3, page 17 Section 2.8.2.3, page 58 3. Support For Additional Intel Pentium 4 Processors Section 1.6, Processor, will change in its entirety as follows: 1.6 Processor CAUTION Use only the processors listed below. Use of unsupported processors can damage the board, the processor, and the power supply. See the Intel® Desktop Board D845HV/D845WN Specification Update for the most up-to-date list of supported processors for these boards. The D845HV and D845WN boards support a single Pentium 4 processor (in an mPGA478 socket) with a system bus of 400 MHz. The D845HV and D845WN boards support the processors listed in Table 2. All supported onboard memory can be cached, up to the cachability limit of the processor. See the processor's data sheet for cachability limits. 8