Intel D845HV Intel Desktop Board D845HV Specification Update - Page 21

Intel Desktop Board D845HV Specification Update 4. System Cannot Enter ACPI S3 Sleep State With BIOS Revisions HV84510A.86A.0024.P06 And HV84510A.86A.0029.P07 While Using The Windows* 98SE Operating System PROBLEM: An ACPI S3 sleep state cannot be entered when using a combination of BIOS revisions HV84510A.86A.0024.P06 or HV84510A.86A.0029.P07 in conjunction with the Windows* 98SE operating system. IMPLICATION: Users that utilize the ACPI S3 sleep state functionality will not be able to put their system into an ACPI S3 state with BIOS revisions HV84510A.86A.0024.P06 or HV84510A.86A.0029.P07 when the Windows 98SE operating system is used. WORKAROUND: None. STATUS: This erratum was fixed in BIOS revision HV84510A.86A.0031.P08. 5. Wake From an ACPI Sleep State Using Wake Methodologies May Fail PROBLEM: The desktop board hardware leaves the Resume Well Power OK (RSM_PWROK) signal deasserted before and after the resume well power (VccSus3_3 and VccSus1_8) is valid, instead of asserting it for 10 ms after valid power, which is required by the Intel® 82801BA I/O Controller Hub 2 (ICH2) and Intel® 82801BAM I/O Controller Hub 2 Mobile (ICH2-M) Datasheet (order number 290687). The result is that LAN wake attempts may fail. NOTE: Wake from LAN* using the MagicPacket* utility will not be affected by this errata. IMPLICATION: Users that take advantage of LAN wake methods to wake systems from an ACPI sleep state may experience some wake failures. WORKAROUND: None. STATUS: This issue was fixed in BIOS revision HV84510A.86A.0041.P12. 15