Intel D845HV Intel Desktop Board D845HV Specification Update - Page 15
Support For Faster Intel, Pentium, Processors; Add Support For, Intel, Celeron, Processors,
View all Intel D845HV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Intel Desktop Board D845HV Specification Update Table 2. Supported Processors Type Designation Pentium® 4 processor 1.4, 1.5, 1.6, 1.7, 1.8, 1.9, and 2.0 GHz 1.6, 1.8, 2.0 and 2.2 GHz System Bus 400 MHz 400 MHz L2 Cache Size 256 KB 512 KB ✏ NOTE Use only ATX12V or SFX12Vcompliant power supplies with the D845HV and D845WN boards. ATX12V and SFX12V power supplies have an additional power lead that provides required supplemental power for the Intel® Pentium® 4 processor. Always connect the 20-pin and 4-pin leads of ATX12V and SFX12V power supplies to the corresponding connectors on the D845HV and D845WN boards, otherwise the board will not boot. Do not use a standard ATX power supply. The board will not boot with a standard ATX power supply. For information about Processor support Processor usage Power supply connectors Refer to Most recent D845HV Specification Update Section 1.3, page 17 Section 2.8.2.3, page 58 4. Support For Faster Intel Pentium 4 Processors; Add Support For Intel Celeron Processors Section 1.6, Processor, will change in its entirety as follows: 1.6 Processor CAUTION Use only the processors listed below. Use of unsupported processors can damage the board, the processor, and the power supply. See the Intel® Desktop 9