Intel DQ965WC Product Specification - Page 61
Jumper Block
View all Intel DQ965WC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Technical Reference 2.8 Jumper Block CAUTION Do not move the jumper with the power on. Always turn off the power and unplug the power cord from the computer before changing a jumper setting. Otherwise, the board could be damaged. Figure 20 shows the location of the jumper block. The jumper determines the BIOS Setup program's mode. Table 30 lists the jumper settings for the three modes: normal, configure, and recovery. When the jumper is set to configure mode and the computer is powered-up, the BIOS compares the processor version and the microcode version in the BIOS and reports if the two match. Figure 20. Location of the Jumper Block Table 30. BIOS Setup Configuration Jumper Settings Function/Mode Jumper Setting Normal 1-2 Configuration The BIOS uses current configuration information and passwords for booting. Configure 2-3 123 After the POST runs, Setup runs automatically. The maintenance menu is displayed. Recovery None 123 123 The BIOS attempts to recover the BIOS configuration. See Section 3.7 for more information on BIOS recovery. 61