Intel H2000JF System Service Guide - Page 15
Server System Features
View all Intel H2000JF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Server System Features Feature Memory Chipset on each Compute Node Compute Node External I/O connections Compute Node Internal I/O connectors/headers Available I/O Module Options (Sold Separately) System Fans by each Compute Node Compute Node Riser Cards Node Video Node On-board storage controllers and options Description Unbuffered DDR3 and registered DDR3 DIMMs. Memory DDR3 data transfer rates of 800, 1066, 1333 MT/s and 1600 MT/s. DDR3 standard I/O voltage of 1.5V (all speed) and DDR3 Low Voltage of 1.35V (1333MT/s or below). Intel® C600-A chipset with support for optional Storage Upgrade Keys. DB-15 Video connectors. Two RJ-45 Network Interface for 10/100/1000 LAN. One stacked two port USB 2.0 (Port 0/1) connectors. One dedicated 1GbE management port on rIOM carrier (Optional). One InfiniBand* QDR QSFP port (Board SKU: S2600JFQ) or One InfiniBand* FDR QSFP port (Board SKU: S2600JFF). Bridge Slot to extend board I/O: - SCU0 (Four SAS 3Gb/s ports) to backplane. - Front control panel signals. - One SATA (Port 0) 6Gb/s port for DOM. Spare Bridge Slot to extend board I/O: - Mini SAS port (Four SAS 6Gb/s ports) to backplane. - Front control panel signals. One Type-A USB 2.0 connector (USB port 2). One 2x7 pin header for system FAN module. One DH-10 serial Port A connector. One SATA 6 Gb/s (Port 1). One 2x4 pin header for Intel® RMM4 Lite. One 1x4 pin header for Storage Upgrade Key. The following I/O modules utilize a single proprietary on-board connector. An installed I/O module can be supported in addition to standard on-board features and any add-in expansion cards: Quad Port Intel® I350 GbE I/O Module Dual Port Intel® X540 10GbE I/O Module Dual Port Intel®82599 10GbE I/O Module QDR InfiniBand* ConnectX I/O Module FDR InfiniBand* ConnectX I/O Module Three sets of dual rotor managed system fans. One internal power supply fan for each installed power supply unit. Three PCIe Gen III x16 riser slots: Riser slot 1 support PCIe Gen III x16 Riser with LP PCIe add-in card. Riser slot 2 supports PCIe Gen III x8 Riser (for Intel® rIOM and RMM4 NIC port). Or customized PCIe x8 riser for Non-Transparent Bridge (NTB) feature Riser slot 3 cannot be used with bridge board covered. One Bridge Slot for board I/O expansion. Integrated 2D Video Controller 128 MB DDR3 Memory Two single port SATA connectors (on baseboard and bridge board) capable of supporting up to 6 GB/sec. SCU0 4-port up to 3 GB/sec SAS/SATA through bridge board. Intel® RAID C600 Upgrade Key support providing optional expanded SATA/SAS RAID capabilities. 2 Intel® Server System H2000JF Family Service Guide