Intel H2000JF System Service Guide - Page 50
Installing Spare Bridge Board with SAS 6G solution
![]() |
View all Intel H2000JF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Hardware Installations and Upgrades Figure 58. Installing the Bridge Board Installing Spare Bridge Board with SAS 6G solution Replacing Node Bridge Board 1. Remove pre-installed bridge board from node tray, see Figure 57. 2. Plug in the card edge of spare bridge board to bridge slot, see letter B of Figure 59. 3. Align the plastic clip at the front of the board, see letter A. 4. Fasten the bridge board with six screws, see letter C. Intel® Server System H2000JF Family Service Guide 37
![](/manual_guide/products/intel-h2000jf-service-guide-e35e84f/50.png)
Hardware Installations and Upgrades
Intel
®
Server System H2000JF Family Service Guide
37
Figure 58. Installing the Bridge Board
Installing Spare Bridge Board with SAS 6G solution
Replacing Node Bridge Board
1.
Remove pre-installed bridge board from node tray, see
Figure 57
.
2.
Plug in the card edge of spare bridge board to bridge slot, see letter
B
of
Figure 59
.
3.
Align the plastic clip at the front of the board, see letter
A
.
4.
Fasten the bridge board with six screws, see letter
C
.