Intel H2000JF System Service Guide - Page 39
Installing and Removing Memory
View all Intel H2000JF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Hardware Installations and Upgrades Figure 37. Installing Processor Heatsink Removing the Processor 1. Remove the processor heatsink, see Figure 30. 2. Open the socket lever, see Figure 31. 3. Open the load plate, see Figure 32. 4. Remove the processor. Installing and Removing Memory Installing Memory 1. Locate the DIMM sockets. Make sure the clips at either end of the DIMM socket(s) are pushed outward to the open position (see letter A). 2. Holding the DIMM by the edges, remove it from its anti-static package. Position the DIMM above the socket. Align the notch on the bottom edge of the DIMM with the key in the DIMM socket (see letter B). 3. Insert the bottom edge of the DIMM into the socket (see letter C). When the DIMM is inserted, push down on the top edge of the DIMM until the retaining clips snap into place (see letter D). Make sure the clips are firmly in place (see letter E). 26 Intel® Server System H2000JF Family Service Guide