Intel H2000JF System Service Guide - Page 28
Removing and Installing the System Top Cover
![]() |
View all Intel H2000JF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Hardware Installations and Upgrades 2. Remove the left end of front bezel from rack handle (see letter A). 3. Rotate the front bezel anticlockwise to release the latches on the right end from the rack handle (see letter B). Figure 19. Removing the Front Bezel Installing the Front Bezel Note: Before installing the bezel, you must install the rack handles. 1. Lock the right end of the front bezel to the rack handle (see letter A). 2. Rotate the front bezel clockwise till the left end clicks into place (see letter B). 3. Lock the bezel if needed. Figure 20. Installing the Front Bezel Removing and Installing the System Top Cover Removing the System Top Cover The server system must be operated with the system cover in place to ensure proper cooling. You will need to remove the top cover to add or replace components (backplane, main power cables, power distribution board) inside of the server. Before removing the top cover, power down the server and unplug all peripheral devices and the power cable(s). Intel® Server System H2000JF Family Service Guide 15
![](/manual_guide/products/intel-h2000jf-service-guide-e35e84f/28.png)