Intel H2000JF System Service Guide - Page 40
Installing and Removing Hot-swap Hard Drive
View all Intel H2000JF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Hardware Installations and Upgrades Figure 38. Installing Memory Removing Memory 1. Locate the DIMM sockets. Gently spread the retaining clips at each end of the socket. The DIMM lifts from the socket. 2. Holding the DIMM by the edges, lift it from the socket, and store it in an anti-static package. Installing and Removing Hot-swap Hard Drive Caution: If you do not install all drives, empty drive bays must be occupied by carriers with blank plastic drive provided to maintain proper system cooling. Installing a Hard Disk Drive into 3.5" Hard Drive Carrier 1. Remove the four screws securing the HDD interface bracket and install 3.5" HDD with screws shown in letter A. Figure 39. Installing Hard Disk Drive - installing 3.5" HDD to Carrier 2. With the lever open, insert the hard disk drive assembly into the chassis (see letter A). Push in the lever to lock it into place (see letter B). Intel® Server System H2000JF Family Service Guide 27