Intel S5500HV Product Specification - Page 55
DDR3 voltage control jumpers **Future Support Only
View all Intel S5500HV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Configuration Jumpers Intel® Server Board S5500HV/Intel® Server System SR1670HV TPS 6.5 DDR3 voltage control jumpers (**Future Support Only) The server board provides a DDR3 voltage control jumper block for each CPU bank of memory. These jumper blocks change the voltage level supplied to the DIMM bank, and should only be changed when low voltage DDR3 DIMMs are installed. Caution - Moving these jumpers from their Default position may cause irreparable damage.The use of LV (low voltage) DDR3 DIMMs on this server board is intended for future use only, and will only be supported after Intel has validated their functionality. This document will be updated with proper usage information once validation is complete and tested LV DDR3 DIMMs are added to the Tested Memory List for this server board. Revision 1.2 Intel Confidential 46 Intel order number E69391-006