Intel SCB2 Product Guide - Page 10
Processor, Memory, PCI Riser Slots - motherboard
UPC - 735858148962
View all Intel SCB2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Processor The SCB2 accommodates one or two Intel Pentium III processors with 512k cache in the FC-PGA2 package. This processor uses the .13 micron technology and offers advanced performance. The processor external interface operates at a maximum of 133 MHz. For a complete list of supported processors see: http://support.intel.com/support/motherboards/server/scb2 Memory The system board contains six 168-pin DIMM slots each supporting 72-bit ECC (64-bit main memory plus ECC) registered SDRAM DIMMs (PC-133 compatible). Memory is two-way interleaved and partitioned in three banks. You may install a minimum of 128 MB (64MB x 2) and as much as 6 GB. The controller automatically detects, sizes, and initializes the memory array, depending on the type, size, and speed of the installed DIMMs, and reports memory size and allocation to the server via configuration registers. ✏ NOTE Use DIMMs that have been tested for compatibility with the server board. Contact your sales representative or dealer for a current list of approved memory modules. Check the Intel Customer Support website for the latest tested memory list: http://support.intel.com/support/motherboards/server/scb2 PCI Riser Slots The server board has two PCI riser slots, each capable of supporting 64-bit/66-MHz PCI riser cards. PCI features: • Bus speed up to 66 MHz • 32 bit memory addressing • 5 V/3.3 V signaling environment • Burst transfers of up to 512 Mbps • 8, 16, 32, or 64-bit data transfers • Plug and Play ready • Parity enabled 10 Intel Server Board SCB2 Product Guide