Intel SCB2 Product Guide - Page 89
Problems with Network, The Activity LED doesn't light
![]() |
UPC - 735858148962
View all Intel SCB2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Problems with Network The server hangs when the drivers are loaded: q Change the PCI BIOS interrupt settings. Try the "PCI Installation Tips" below. Diagnostics pass, but the connection fails: q Make sure the network cable is securely attached. q Make sure you specify the correct frame type in your NET.CFG file. The Activity LED doesn't light: Make sure the network hub has power. The controller stopped working when an add-in adapter was installed: q Make sure the cable is connected to the port from the onboard network controller. q Make sure your PCI BIOS is current. q Make sure the other adapter supports shared interrupts. Also, make sure your operating system supports shared interrupts; OS/2† does not. q Try reseating the add in adapter. The add-in adapter stopped working without apparent cause: q Try reseating the adapter first; then try a different slot if necessary. q The network driver files may be corrupt or deleted. Delete and then reinstall the drivers. q Run the diagnostics. Solving Problems 89
![](/manual_guide/products/intel-scb2-product-guide-5949964/89.png)