Intel SCB2 Product Guide - Page 44

Record BIOS Setup Settings, If BIOS Setup Is Inaccessible, BIOS Setup Menus

Get Intel SCB2 - Server Board Motherboard PDF manuals and user guides
UPC - 735858148962
View all Intel SCB2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

Run the System Setup Utility (SSU) to setup the following: • Enable Server Management Features • Read System Event Log (SEL) • Read Sensor Data Records • Read System FRU Information • Specify boot device sequence • Setup system passwords Record BIOS Setup Settings Record your BIOS Setup settings. If default values ever need restoring (after a CMOS clear, for example), you must run BIOS Setup again. Your record will make this much easier. If BIOS Setup Is Inaccessible If you have a misconfigured diskette drive, and you cannot use BIOS Setup to correct the problem, you might need to clear CMOS memory. To clear CMOS, either of two methods can be used. 1. Press the reset button and hold it down for four seconds or more, and then, while holding the reset button down, press the power button. Release both buttons at the same time. 2. Move the "Clear CMOS" jumper found on the configuration jumper block on the baseboard. BIOS Setup Menus Table 7. BIOS Setup Menu Navigation To: Get general help Move between menus Go to the previous item Go to the next Item Change the value of an item Select an item or display a submenu Leave a submenu or exit BIOS Setup Reset to BIOS Setup defaults Save and exit BIOS Setup Press: or

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
44
Intel Server Board SCB2 Product Guide
Run the System Setup Utility (SSU) to setup the following:
•
Enable Server Management Features
•
Read System Event Log (SEL)
•
Read Sensor Data Records
•
Read System FRU Information
•
Specify boot device sequence
•
Setup system passwords
Record BIOS Setup Settings
Record your BIOS Setup settings.
If default values ever need restoring (after a CMOS clear, for
example), you must run BIOS Setup again.
Your record will make this much easier.
If BIOS Setup Is Inaccessible
If you have a misconfigured diskette drive, and you cannot use BIOS Setup to correct the problem,
you might need to clear CMOS memory.
To clear CMOS, either of two methods can be used.
1.
Press the reset button and hold it down for four seconds or more, and then, while holding the
reset button down, press the power button.
Release both buttons at the same time.
2.
Move the “Clear CMOS” jumper found on the configuration jumper block on the baseboard.
BIOS Setup Menus
Table 7.
BIOS Setup Menu Navigation
To:
Press:
Get general help
<F1> or <Alt+H>
Move between menus
←
→
Go to the previous item
↑
Go to the next Item
↓
Change the value of an item
+ or -
Select an item or display a submenu
<Enter>
Leave a submenu or exit BIOS Setup
<Esc>
Reset to BIOS Setup defaults
<F9>
Save and exit BIOS Setup
<F10>