Intel SCB2 Product Guide - Page 7

1 Description Server Board Features The SCB2 is available in either SCSI or ATA hard drive interface versions as described in Table 1. The features listed in Table 2 are common to both server board versions. Table 1. Feature SCSI ATA Server Board Versions Description Dual channel Ultra160 LVD SCSI accessible at rear panel I/O and internally Dual channel ATA 100 RAID ✏ NOTE The feature set listed in Table 2 only reflects usage with either the 1U Intel® SR1200 or the 2U Intel® SR2200 server chassis. Third-party or OEM chassis may not provide all of the features listed below. Table 2. Server Board Features Feature Description Processors Dual processor slots supporting Intel® Pentium® III processors in a Socket370 Flip Chip Pin Grid Array (FC-PGA) package. Memory Six dual inline memory module (DIMM) slots support: • SDRAM DIMMs: 133 MHz, ECC, registered, PC/133 compliant, 72-bit, 168-pin, gold contact, 3.3V. A 1U chassis requires low-profile (LP) 1.2-inch DIMMs. Graphics • Up to 6 GB of memory in a 2U chassis. Integrated onboard ATI RAGE† XL PCI 64 bit SVGA controller. Video Memory 8 MB SDRAM of video memory PCI bus Two PCI riser slots capable of supporting either of the following configurations: • 1U configuration-one full-length, full-height 64-bit/66-MHz PCI riser slot and one Low Profile (LP) 64-bit/66-MHz PCI riser slot. • 2U configuration-three full-length, full-height 64-bit/66-MHz PCI riser slots and three LP 64-bit/66-MHz PCI riser slots. Network System I/O Dual on-board 10/100 Network Interface Controllers (NIC) • One PS/2† keyboard/mouse port (6 pin DIN) (See Table 1) • One VGA video port (15 pin) • Two external USB ports, internal header providing two additional USB • One external serial port (RJ-45), one internal COM 1 header • One external SCSI port (SCSI server board only), one internal • Two NIC ports (RJ-45) Form Factor Server ATX form factor 7