Intel SR2520SAFNA User Guide - Page 57
Installing the Heat Sinks
UPC - 735858191036
View all Intel SR2520SAFNA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
10. Remove the protective socket cover (see Figure 24). Note: Retain the protective socket cover for use when removing a processor that will not be replaced. A B AF000178 Figure 24. Removing the Socket Cover 11. Lower the CPU load plate and lower the socket lever completely. Installing the Heat Sink(s) The heat sink has Thermal Interface Material (TIM) located on the bottom of it. Use caution when you unpack the heat sink so you do not damage the TIM. 1. Set the heat sink over the processor, lining up the four captive screws with the four posts surrounding the processor. 2. Loosely screw in the captive screws on the heat sink corners in a diagonal manner. Do no fully tighten one screw before tightening another. 3. Gradually and equally tighten each captive screw until each is firmly tightened. Intel® Server System SR2520SA User's Guide 35