Intel SR2520SAFNA User Guide - Page 91

4. Wait five seconds. 5. Return the Password Clear jumper to the Password Clear Protect position, covering pins 1 and 2. 6. Close the server chassis. 7. Reconnect the AC power and power up the server. 8. The password is now cleared and can be reset by going into BIOS setup. Clearing the CMOS If you are not able to access the BIOS setup screens, the CMOS Clear jumper will need to be used to reset the configuration RAM. 1. Power down the system and disconnect the AC power. 2. Open the server. 3. Move the jumper from the normal operation position, CMOS Clear by BMC, at pins 1 and 2 to the CMOS Clear Force Erase position, covering pins 2 and 3. CMOS CLR PASSWORD CLR Default Default 2 CLEAR 2 CLEAR 3 CMOS 3 PASSWORD J1J1 J1J2 Figure 57. Clear CMOS Jumper AF000187 4. Wait five seconds. 5. Return the CMOS Clear jumper to the CMOS Clear by BMC location, covering pins 1 and 2. 6. Close the server chassis. 7. Reconnect the AC power and power up the system. 8. The CMOS is now cleared and can be reset by going into the BIOS setup. Intel® Server System SR2520SA User's Guide 69