Intel SR2520SAFNA User Guide - Page 66
Installing or Removing the Optical Drive
![]() |
UPC - 735858191036
View all Intel SR2520SAFNA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Installing or Removing the Optical Drive Cautions: The optical drive is NOT hot swappable. Before removing or replacing the drive, you must first take the server out of service, turn off all peripheral devices connected to the system, turn off the system by pressing the power button, and unplug the AC power cord from the system or wall outlet. Installing the Optical Drive 1. Observe the safety and ESD precautions at the beginning of this book. See "Safety Information". 2. Power down the server and unplug all peripheral devices and the AC power cable(s). 3. Remove the front bezel if it is installed. For instructions, see "Removing the Front Bezel". 4. Remove the server system cover. For instructions, see "Removing the System Cover". 5. Remove the front panel. For instructions, see "Replacing the Front Panel Board". 6. Remove the four screws holding the drive bracket to the server system (see letter "A" in the figure below), and remove the bracket from the system (see letter "B" in the figure below). A B AF001825 Figure 31. Removing Drive Bracket from the Server System 44 Intel® Server System SR2520SA User's Guide
![](/manual_guide/products/intel-sr2520sax-user-guide-9131fdb/66.png)