Intel SR2520SAFNA User Guide - Page 64
Installing Fixed Hard Drives into the Server System, SR2520SAF/SR2520SAFR
UPC - 735858191036
View all Intel SR2520SAFNA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
2. Remove the four screws securing the hard drive bracket in place (see letter "A" in the figure below). Save the screws; you will use them to install the hard drive bracket back into the server system. 3. Remove the hard drive bracket from the server system. 4. Install the hard drive(s) into the hard drive bracket using four screws (see letter "B" in the figure below). Note: Install screws into the round holes first, then the slotted holes. 5. When all hard drives have been installed in the hard drive cage, reinstall the hard drive bracket and secure into the server system with the four screws you removed in step 2 (see letter "C" in the figure below). A B C AF001665 Figure 29. Installing Fixed Hard Drive(s) into the Server System (SR2520SAF/SR2520SAFR) 6. Install the server system cover. For instructions, see "Installing the System Cover". 7. Plug all peripheral devices and the AC power cable(s) into the server. 42 Intel® Server System SR2520SA User's Guide