Intermec PB3 PB3 Mobile Printer User's Guide - Page 15
To remove the battery, To charge the battery with the AC adapter/charger
View all Intermec PB3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
3 Insert the end of the battery without contacts into the battery compartment first. The contact end drops into place. Be sure you insert the battery correctly, or you may damage the battery contacts in the printer. 4 Close the battery door and slide the latch away from the belt loop knob to lock the latch. To remove the battery • Unlock and open the battery door and tip the printer to one side to remove the battery. To charge the battery with the AC adapter/charger 1 Plug the AC adapter into the power connector. 2 Install the appropriate AC plug on the adapter. The adapter comes with four different plugs suitable for most regions worldwide. 3 Make sure the printer is off and connect the adapter to AC power. The Battery LED turns on, indicating that the battery is charging. Note: If the other LEDs turn on, press the Power button to turn the printer off. PB3 Mobile Printer User's Guide 15