Intermec PB3 PB3 Mobile Printer User's Guide - Page 20
Using the Belt Loop, Do not try to remove the printer from the belt loop without
View all Intermec PB3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Using the Belt Loop 1 Place the belt loop over your belt and snap it to secure it. 2 Insert the belt loop knob into the connector slot on the belt loop and slide the printer down until the knob clicks into place. 3 To disconnect the printer from the belt loop, press both of the connector latches and slide the belt loop knob out of the slot. Note: Do not try to remove the printer from the belt loop without pressing both latches. 20 PB3 Mobile Printer User's Guide
20
PB3 Mobile Printer User’s Guide
Using the Belt Loop
1
Place the belt loop over your belt and snap it to secure it.
2
Insert the belt loop knob into the connector slot on the belt loop
and slide the printer down until the knob clicks into place.
3
To disconnect the printer from the belt loop, press both of the
connector latches and slide the belt loop knob out of the slot.
Note:
Do not try to remove the printer from the belt loop without
pressing both latches.