Intermec SR31T SR31T Tethered Scanner User's Guide
Intermec SR31T Manual
 |
View all Intermec SR31T manuals
Add to My Manuals
Save this manual to your list of manuals |
Intermec SR31T manual content summary:
- Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 1
SR31T Tethered Scanner 1017ST01 User's Guide - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 2
of Intermec Technologies Corporation. There are U.S. and foreign patents as well as U.S. and foreign patents pending. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and/or other countries. ii SR31T Tethered Scanner User's Guide - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 3
Global Services and Support vi Warranty Information vi Web Support vi Send Feedback vii Telephone Support vii Who Should Read This Manual vii Related Documents vii Patent Information viii 1 Introducing the SR31T Tethered Scanner 1 What is the SR31T Tethered Scanner 2 Supported Interfaces - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 4
35 Damaged 1-Dimensional Bar Codes 35 Configuring Predefined Imager Modes 35 Configuring Your Scanner with EasySet 37 Online Setup with EasySet 37 Offline Setup with EasySet 38 5 Troubleshooting and Maintaining the SR31T 39 Troubleshooting the SR31T 40 iv SR31T Tethered Scanner User's Guide - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 5
43 Upgrading the SR31T firmware 45 Firmware Upgrade using EasySet and WinFlash 46 Maintaining the SR31T 51 Cleaning the SR31T 51 A Specifications and Reading Distances 53 Specifications 54 Reading Distances 58 SR31T1D 59 SR31T2D 60 SR31THP 61 SR31T Tethered Scanner User's Guide v - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 6
.com to download our current manuals (in PDF). Visit the Intermec technical knowledge base (Knowledge Central) at www.intermec.com and click Support > Knowledge Central to review technical information or to request technical support for your Intermec product. vi SR31T Tethered Scanner User's Guide - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 7
configuring, and maintaining the SR31T Tethered Scanner. This guide provides you with information about the features of the SR31T Tethered Scanner and how to install, configure, operate, maintain and troubleshoot it. Related Documents The Intermec web site at www.intermec.com contains our documents - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 8
Before You Begin Patent Information There may be U.S. and foreign patents pending. viii SR31T Tethered Scanner User's Guide - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 9
1 Introducing the SR31T Tethered Scanner This chapter provides an overview of the SR31T Tethered Scanner. This chapter covers these topics: • What is the SR31T Tethered Scanner • Supported Interfaces • Powering the SR31T • Connecting the Interface Cable • Removing the Interface Cable • Accessories 1 - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 10
/Intermec Ready-to-Work indicator Trigger Cable release button SR31T Tethered Scanner Cable The SR31T is available in the following models: • 1D imager-SR31T1D-Sxxx • 2D imager-SR31T2D-Sxxx • Healthcare 2D imager-SR31T2D-Hxxx • High performance 2D imager-SR31THP-Sxxx 2 SR31T Tethered Scanner - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 11
Scanner SR31T1D-Sxxx CN: XXXXXXX-XXXX MODEL, , : XXXXXXXX MFD, , : YYYYMMDD SR31T Model Type: The model type of your SR31T is indicated in the first part of the configuration number. In this illustration, the model type is SR31T1DSxxx for standard 1D imager. Supported Interfaces The SR31T - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 12
to the different interfaces supported. All cables are connected to the scanner in the same way - insert the SR31T cable connector into your product SR31T will beep and vibrate and the blue Intermec-Readyto-Work indicator™ LED will come on (default settings). 4 SR31T Tethered Scanner User's Guide - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 13
Interface Cable To remove the cable: 1 Push the cable firmly into the scanner to make removal easier. 2 Push and hold the cable release button and keep it pushed in while you pull the cable from the scanner (pull on the cable grip, not on the cable itself). SR31T Tethered Scanner User's Guide 5 - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 14
) SR31-CAB-K001 RS-232 cable with female DB9 connector SR31-CAB-R001 and power jack (6.5 ft) Wand Emulation cable SR31-CAB-W001 SR31T Power Supply Power Supply Intermec 5V universal power supply Part Number 851-089-xxx Note: You will also need a power cord to plug in the power supply. The - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 15
Chapter 1 - Introducing the SR31T Tethered Scanner Optional Accessories The following accessories are optional. SR31T Optional Accessories Stands for must change the default trigger setting) and store your scanner when you are not using it. SR31 Desktop Adjustable Stand: P/N SR31-STA - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 16
Chapter 1 - Introducing the SR31T Tethered Scanner Flexible Stand The flexible stand is a rugged adjustable stand suitable for industrial applications. SR31 Flexible Stand: P/N SR31-FLX-xxxx 8 SR31T Tethered Scanner User's Guide - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 17
2 Scanning with the SR31T Tethered Scanner This chapter explains how to scan bar codes and includes the following sections: • Understanding the Lights • Understanding the Beeps and Vibrate Alert • Scanning Bar Codes 9 - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 18
Light State Off On (by default) What it Means The SR31T is not electrically powered. The SR31T is ready to scan bar codes. Note: The blue Intermec Ready-to-Work light is enabled by default but you can use the EasySet scanner setup software to disable the light or choose another color: • in - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 19
successfully read. twice Red light comes on Transmission error for 2 seconds or Configuration bar code was not accepted Red continuously on NVM (non-volatile memory) problem. and 6 fast beeps every 2 seconds SR31T Tethered Scanner User's Guide 11 - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 20
a library, where you do not want to make a lot of noise. To turn on vibrate alert • Scan this bar code: Turn on vibrate alert 12 SR31T Tethered Scanner User's Guide - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 21
your vision. Use the appropriate SR31T scanner model for your scanning requirements: • the SR31T1D model contains a 1D imager to scan 1D bar code symbologies • the SR31T2D models contain a 2D imager which can read both 1D and 2D bar code symbologies • the SR31THP model contains a high performance - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 22
: All models (1D and 2D) • Code 39 • Code 128 / GS1-128 • EAN/UPC 2D models only • Data Matrix • PDF417 • QR Code Note: If you want to read other bar code symbologies, you can use the EasySet scanner setup software to enable and configure those symbologies: • in EasySet, select the SR31T product and - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 23
vibrates. 3 Release the trigger. Scanning Bar Codes: The aiming and scanner beams that you see depend on which SR31T model you are using. To scan with an SR31T 2D imager model (2D or HP) 1 Point the scanner at the bar code and hold the SR31T steady a few inches from the label. 2 Pull the trigger - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 24
(to activate, see Hands-Free Scanning in Chapter 4). Autostand Triggering Mode Autostand mode is different depending on the scanner model. This section explains the difference between: • Autostand for the SR31T1D • Autostand for 2D models (SR31T2D, SR31THP) 16 SR31T Tethered Scanner User's Guide - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 25
is flashing you can present a bar code in front of the scanner window and it will be scanned. To return to Level mode, pull the trigger. Autostand for 2D Models (SR31T2D, SR31THP) When using 2D and HP models, Autostand is a mix of Level and Presentation triggering modes. When in Level mode you - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 26
Chapter 2 - Scanning with the SR31T Tethered Scanner 18 SR31T Tethered Scanner User's Guide - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 27
3 SR31T Interfaces This chapter explains the different interfaces available with the SR31T: • USB Interface • RS-232 Interface • Keyboard Wedge Y-Cable Interface • Wand Emulation 19 - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 28
can be connected to a USB host using a USB cable. The SR31T is USB 2.0 compliant. Power is provided either by the host or by an . Connecting a USB Cable To connect with a USB cable 1 Connect the USB cable to your SR31T and to the host. Standard USB cable 20 SR31T Tethered Scanner User's Guide - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 29
hub or disconnect other USB devices. Otherwise use a powered USB cable. 4 If necessary, use the configuration bar codes in the next section to configure your SR31T for an International keyboard. The default keyboard is North America. SR31T Tethered Scanner User's Guide 21 - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 30
available with the EasySet scanner setup software (see Configuring Your Scanner with EasySet in Chapter 4). North American Windows (*) French Windows French Canadian Windows 95/98 French Canadian Windows XP/2000 German Windows Spanish Windows Italian Windows 22 SR31T Tethered Scanner User's Guide - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 31
Swedish Windows Japanese Windows Czech Republic Windows Hungarian 101-Key Chapter 3 - SR31T Interfaces UK English Windows Brazilian Portuguese Windows Slovakian Windows SR31T Tethered Scanner User's Guide 23 - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 32
Chapter 3 - SR31T Interfaces USB Cable Mode By default the USB cable mode is set to Keyboard HID. However you can also set up your scanner to use the a USB Cable Mode configuration bar code, the scanner beeps twice then restarts. When it restarts, the scanner will beep twice, flash a series of green - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 33
your USB Virtual COM Port Driver installation after you have installed the driver and set your scanner to USB Virtual COM mode, you can use EasySet or a serial console application such as HyperTerminal to open the Intermec Virtual Com Port and scan bar codes. SR31T Tethered Scanner User's Guide 25 - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 34
Interfaces RS-232 Interface The SR31T can be connected to a host using one of the RS-232 cables. To connect with an RS-232 cable 1 Turn off your host device. 2 Connect the RS-232 cable to your SR31T and the host. RS-232 cable with power jack 3 Connect the power supply to the cable and an AC power - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 35
setup. All bar codes marked with (*) indicate the default value. Additional configuration options are available with the EasySet scanner setup software (see Chapter 4, Configuring Your Scanner with EasySet). Baud Rate 38400 57600 (*) 115200 128000 230400 SR31T Tethered Scanner User's Guide 27 - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 36
Chapter 3 - SR31T Interfaces 256000 Data Bits 7 Parity None (*) Odd Stop Bits 2 28 460800 8 (*) Even 1 (*) SR31T Tethered Scanner User's Guide - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 37
Keyboard Wedge Y-Cable Interface The SR31T can be connected to a host using a keyboard wedge Ycable. Power is provided either by the host Wedge Y-Cable To connect with a keyboard wedge Y-cable 1 Turn off your host device. 2 Connect the Y-cable to your SR31T. SR31T Tethered Scanner User's Guide 29 - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 38
enough power, connect the power supply to the Y-cable and an AC power outlet. 4 Turn on your host device. The scanner beeps twice. 5 If necessary, configure your SR31T for an international keyboard (see the International Keyboard section in this chapter). The default keyboard is North America. 30 - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 39
SR31T Cable List" on page 6 for a list of part numbers for the different cables. The type of cable depends on the host device or intermec Intermec computer. 2 Connect the wand emulation cable to your SR31T and the host or Intermec see Chapter 4, "Configuring the SR31T Scanner" on page 33. Logical - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 40
Chapter 3 - SR31T Interfaces 32 SR31T Tethered Scanner User's Guide - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 41
the SR31T Scanner This chapter provides some basic configuration bar codes and information on how to configure the SR31T using the EasySet scanner setup software. This chapter includes: • Basic Setup with Configuration Bar Codes • Hands-Free Scanning • Optimizing Decoding • Configuring Your Scanner - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 42
Configuring the SR31T Scanner Basic Setup with Configuration Bar Codes This chapter provides you with configuration bar codes for a basic setup. For more configuration options, use EasySet (see Configuring Your Scanner with EasySet in this chapter). Resetting Your Scanner To reset your scanner, read - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 43
Damaged 1D Codes - Enable Damaged 1D Codes - Disable (*) Configuring Predefined Imager Modes When using a 2D model (SR31T2D, SR31THP), you can optimize the reading performance of the scanner by the type of bar code, environment and reading surface. SR31T Tethered Scanner User's Guide 35 - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 44
(shiny labels and cell phone scanning) Select the predefined imager setting that best suits your needs: 1D bar codes only Standard 1D and 2D bar codes (*) Standard 1D and 2D bar codes, bright environment Standard 1D and 2D bar codes, reflective surface 36 SR31T Tethered Scanner User's Guide - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 45
Chapter 4 - Configuring the SR31T Scanner Configuring Your Scanner with EasySet You can use EasySet, the Intermec scanner setup software, to set up your product in two ways: • Online setup-send configuration commands from EasySet directly to the product. • Offline setup-send configuration commands - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 46
of the EasySet window. 2 Select your product. 3 Open the folders in EasySet to find the configuration commands needed. Double-click each command to send it to the setup sheet. 4 Click on the Print icon to print out the setup sheet and scan the commands. 38 SR31T Tethered Scanner User's Guide - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 47
5 Troubleshooting and Maintaining the SR31T Use this chapter to solve problems you may have while using the SR31T. This chapter contains these topics: • Troubleshooting the SR31T • Calling Product Support • Upgrading the SR31T firmware • Maintaining the SR31T 39 - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 48
and Maintaining the SR31T Troubleshooting the SR31T Problems and Possible Solutions If you have problems using your SR31T, use this section to try to find a solution. If you cannot solve your problem, contact your Intermec Product Support representative (see Calling Product Support in the next - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 49
Chapter 5 - Troubleshooting and Maintaining the SR31T Problems and Possible Solutions (continued) Problem Possible Solution You pull the trigger, the Try these possible solutions: red scanning beam • Make sure that the SR31T is configured for the turns on, but you symbology you are scanning. - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 50
(beep melody), then acknowledges power-up again (beeps, vibrate alert). Note: If your scanner still does not operate correctly after a rescue procedure, contact your Intermec Product Support representative (see Calling Product Support in the next section). 42 SR31T Tethered Scanner User's Guide - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 51
Chapter 5 - Troubleshooting and Maintaining the SR31T Calling Product Support To talk to an Intermec Product Support representative: • In the U.S.A. and Canada, call 1-800-755-5505 • Outside the U.S.A. and Canada, contact your local Intermec representative. For help, go to www.intermec.com > About - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 52
Troubleshooting and Maintaining the SR31T Using EasySet to display the current version information This method is applicable for the following interfaces: • RS-232 • USB Virtual Com • USB Keyboard HID 1 Follow the procedure for online setup with EasySet (see Configuring Your Scanner with EasySet in - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 53
.intermec.com/ EasySet with WinFlash. • SR31T firmware upgrade file (.bin) To download the latest firmware You must download the latest firmware upgrade from the Intermec web site at www.intermec.com. 1 Go to Support > Downloads. 2 From the Product Category drop-down list, choose Bar Code Scanners - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 54
each time as requested to complete the VCP driver installation. 4 From the Tools menu, select Upgrade product firmware to start WinFlash. If WinFlash is not already installed you will be asked to install it click Yes and follow the installation instructions. 46 SR31T Tethered Scanner User's Guide - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 55
Chapter 5 - Troubleshooting and Maintaining the SR31T 5 Select your scanner model and click OK. 6 Select the cable type you are using for the firmware upgrade and click Next. SR31T Tethered Scanner User's Guide 47 - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 56
Chapter 5 - Troubleshooting and Maintaining the SR31T 7 Click Browse to the find the correct firmware upgrade file (.bin) you downloaded for your product model of COM ports . . . (RS-232 cables only: Select the fastest baud rate setting for a quicker upgrade) 48 SR31T Tethered Scanner User's Guide - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 57
Chapter 5 - Troubleshooting and Maintaining the SR31T . . . and click Next. 10 Click Start download. 11 RS-232 cables only: Scan the Firmware upgrade bar code that appears on the screen and click OK. SR31T Tethered Scanner User's Guide 49 - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 58
5 - Troubleshooting and Maintaining the SR31T If you can't read the code on the screen, print out and read the code on this page. 12 When the firmware upgrade is complete, the scanner emits a not successful, you must restart the firmware download procedure. 50 SR31T Tethered Scanner User's Guide - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 59
5 - Troubleshooting and Maintaining the SR31T Maintaining the SR31T Opening the SR31T voids the warranty and may cause damage to internal components. Cleaning the SR31T Clean the scanner window as often as needed for the environment in which you are using the SR31T. To clean the scanner window, you - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 60
Chapter 5 - Troubleshooting and Maintaining the SR31T 52 SR31T Tethered Scanner User's Guide - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 61
A Specifications and Reading Distances This appendix contains the technical specifications and reading distances for the different SR31T scanner models: • Specifications • Reading Distances 53 - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 62
Consumption-Scanning (5V power supply, 25°C/77°F ambient lighting) SR31T1D SR31T2D RS-232 = 120 mA USB = 120 mA Keyboard wedge = 120 mA RS-232 = 340 mA USB = 360 mA Keyboard wedge = 370 mA SR31THP RS-232 = 300 mA USB = 320 mA Keyboard wedge = 330 mA 54 SR31T Tethered Scanner User's Guide - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 63
and Reading Distances Typical Power Consumption-Idle State (Ready-To-Work) (5V power supply, 25°C) SR31T1D SR31T2D SR31THP RS-232 = 60 mA USB = 70 mA Keyboard wedge = 60 mA RS-232 = concrete floor Environmental rating IP53 Ambient light 0 to 100 000 lux SR31T Tethered Scanner User's Guide 55 - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 64
Limited GS1 DataBar Omni-Directional GS1 DataBar Stacked Interleaved 2 of 5 Matrix 2 of 5 MSI Plessey Standard 2 of 5 Telepen Bar Code Symbologies for 2D Models (SR31T2D, SR31THP) Australian Post Aztec BPO Infomail Intelligent mail Interleaved 2 of 5 56 SR31T Tethered Scanner User's Guide - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 65
Chapter A - Specifications and Reading Distances Bar Code Symbologies for 2D Models (SR31T2D, SR31THP) Canada Post Japan Post Codabar Matrix 2 of 5 Codablock A Codablock F Code 11 Code 39 Code Postnet QR Code Standard 2 of 5 Sweden Post Telepen TLC 39 SR31T Tethered Scanner User's Guide 57 - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 66
Chapter A - Specifications and Reading Distances Reading Distances Values shown are for typical distances measured from the front end of the scanner bezel in an office environment (200 lux) with extended reading range activated. Note: Minimum distances depend on the number of characters encoded in - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 67
Chapter A - Specifications and Reading Distances SR31T1D 0" 4" 8" 12" 16" 20" 24" 28" 32" 36" 40" in 12" 30 8" EAN/UPC 20 4" 10 0" 0 4" 0.1 mm/4 mils 8" 0.125 mm/5 mils 0. in) 24 cm (9.45 in) 31 cm (12.20 in) 86 cm (33.86 in) 31.5 cm (12.40 in) SR31T Tethered Scanner User's Guide 59 - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 68
Chapter A - Specifications and Reading Distances SR31T2D 0" in 16" 4" 8" 12" 16" 20" 24" 28" 32" 36" 40" 44" 48" 52" 40 12" 30 PDF417 10 mils 8" 20 Data Matrix 10 mils 4" (45.67 in) 40 cm (15.75 in) 24 cm (9.45 in) 35 cm (13.78 in) 18 cm (7.09 in) 60 SR31T Tethered Scanner User's Guide - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 69
Chapter A - Specifications and Reading Distances SR31THP 0" in 16" 4" 8" 12" 16" 20" 24" 28" 32" 36" 40" 44" 48" 52" 40 12" 30 PDF417 10 mils 8" 20 Data Matrix 10 mils 4" (48.82 in) 46 cm (10.11 in) 26 cm (10.24 in) 35 cm (13.78 in) 21 cm (8.27 in) SR31T Tethered Scanner User's Guide 61 - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 70
Chapter A - Specifications and Reading Distances 62 SR31T Tethered Scanner User's Guide - Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 71
- Intermec SR31T | SR31T Tethered Scanner User's Guide - Page 72
Worldwide Headquarters 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com © 2013 Intermec Technologies Corporation. All rights reserved. SR31T Tethered Scanner User's Guide *934-081-001* P/N 934-081-001
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
 |
 |
SR
31T
Tethered Scanner
1017ST01
User’s
Guide