Intermec SR31T SR31T Tethered Scanner User's Guide - Page 35
Setting up the RS-232 Interface, Baud Rate
View all Intermec SR31T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Chapter 3 - SR31T Interfaces 5 If necessary, use the configuration bar codes in the next section to configure your SR31T serial parameters to match the PC. The default serial parameters for the SR31T are: Serial Parameter Baud rate Data bits Parity Stop bits Default Setting 57600 8 None 1 Setting up the RS-232 Interface This section provides configuration bar codes for a basic setup. All bar codes marked with (*) indicate the default value. Additional configuration options are available with the EasySet scanner setup software (see Chapter 4, Configuring Your Scanner with EasySet). Baud Rate 38400 57600 (*) 115200 128000 230400 SR31T Tethered Scanner User's Guide 27
Chapter 3 — SR31T Interfaces
SR31T Tethered Scanner User’s Guide
27
5
If necessary, use the configuration bar codes in the next section to
configure your SR31T serial parameters to match the PC.
The default serial parameters for the SR31T are:
Setting up the RS-232 Interface
This section provides configuration bar codes for a basic setup. All bar
codes marked with (*) indicate the default value. Additional
configuration options are available with the EasySet scanner setup
software (see Chapter 4,
Configuring Your Scanner with EasySet
).
Baud Rate
38400
57600 (*)
115200
128000
230400
Serial Parameter
Default Setting
Baud rate
57600
Data bits
8
Parity
None
Stop bits
1