JVC DR MV79B Instructions - Page 201

HOOKUP AND SETTINGS Edge Type: Selects the edge type for captions. - None: The text has no edge. - Raised: The text is raised. - Depressed: The text is depressed. - Uniform: The text has a uniform edge. - Left Shadow: The text has a left-shadow edge. - Right Shadow: The text has a right-shadow edge. Edge Color: Selects the edge color for captions. DTV Audio Digital channels sometimes provide multiple audio tracks, often in a different language. You can set a default audio language with this setting. Tip: If provided by the broadcaster, the (DTV Multiple Audio Icon) appears on the channel informa- tion display to indicate that you can select one of those audio languages with the AUDIO button. (See page 24) Audio Settings To access to the General Setting. 1. Press HOME and the Home menu appears. 2. Select [Setup] > [Start] and press ENTER. 3. Use v / V to select B. (Audio) option and press Each DVD disc has a variety of audio output options. Set the Recorder's Audio Output according to the type of audio system you use. Sampling Freq. (Frequency) If your receiver or amplifier is NOT capable of handling 96 kHz signals, select 48 kHz. When this choice is made, this unit automatically converts any 96 kHz signals to 48 kHz so your system can decode them. If your receiver or amplifier is capable of handling 96 kHz signals, select 96 kHz. When this choice is made, this unit passes each type of signal through without any further processing. Check the documentation for your amplifier to verify its capabilities. DRC (Dynamic Range Control) With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). This allows you to listen to a movie at a lower volume without losing clarity of sound. Set DRC to [ON] for this effect. Lock (Parental Control) Settings To access to the General Setting. 1. Press HOME and the Home menu appears. 2. Select [Setup] > [Start] and press ENTER. 3. Use v / V to select (Lock) option and press B. OR Dolby Digital / DTS / MPEG [Bitstream]: Select [Bitstream] if you connect the DVD+VCR's DIGITAL AUDIO OUTPUT jack to an amplifier or other equipment with a Dolby Digital, DTS or MPEG decoder. [PCM] (for Dolby Digital / MPEG): Select when connected to a two-channel digital stereo amplifier. DVDs encoded in Dolby Digital or MPEG will be automatically downmixed to two-channel PCM audio. [OFF] (for DTS): If you select [OFF], the DTS signal is not output through the DIGITAL AUDIO OUTPUT [US Rating] [Canadian Rating] Notes: • Lock System and TV Rating options are effective for digital TV program only. • When you set the TV Rating, a program with a TV Rating beyond your rating setting cannot be recorded correctly. (Normal recording, Timer recording, etc.) • The default TV Rating setting is to allow all programs to be viewed. 19