JVC DR MV79B Instructions - Page 266
DRC Dynamic Range Control, Disc Record Mode, VCR Record Mode, DV Record Audio, Auto
UPC - 046838034138
View all JVC DR MV79B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 266 highlights
HOOKUP AND SETTINGS DRC (Dynamic Range Control) With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). This allows you to listen to a movie at a lower volume without losing clarity of sound. Set DRC to [ON] for this effect. Recording Settings To access to the General Setting. 1. Press HOME and the Home menu appears. 2. Select [Setup] > [Start] and press ENTER. 3. Use v / V to select press B. (Recording) option and Disc Record Mode You can set the picture quality for recording; XP (High Quality), SP (Standard Quality), LP (Low Quality), EP (Extend Quality) Auto Chapter During recording, chapter markers are added automatically at fixed intervals. You can set this interval to 5 minutes or 10 minutes. To turn off automatic chapter marking, select [None]. Disc Settings To access to the General Setting. 1. Press HOME and the Home menu appears. 2. Select [Setup] > [Start] and press ENTER. 3. Use v / V to select (Disc) option and press B. Initialize If you load a completely blank disc, the recorder will initialize the disc. • DVD-R: The recorder initialize the disc to Video mode. The recording mode will always be Video mode. • DVD-RW/DVD+RW/DVD+R/DVD-RAM: The Initialize menu will appears. Select [OK] then press ENTER. DVD-RW disc is initialized to Video mode. Also, you can reformat the DVD-RW/DVD+RW from the Setup menu as below. 1. Select the [Disc Record Mode] option then press B. 2. Use v / V to select a desired Disc Record Mode (XP, SP, LP or EP). 3. Press ENTER to confirm your selection, then press HOME to exit the menu. VCR Record Mode You can set the picture quality for VCR recording; SP (Standard Play), SLP (Super Long Play). DV Record Audio You need to set this if you have a camcorder using 32kHz/12-bit sound connected to the front panel DV IN jack. Some digital camcorders have two stereo tracks for audio. One is recorded at the time of shooting; the other is for overdubbing after shooting. On the Audio 1 setting, the sound that was recorded while shooting is used. On the Audio 2 setting, the overdubbed sound is used. 1. Select the [Initialize] option then press B. [Start] icon is highlighted. 2. Press ENTER. • In case of DVD-RW, use b / B to select a desired Disc Initialize Mode (VR Mode or Video Mode) then press ENTER. • In case of DVD+RW/DVD-RAM, use b / B to select [OK], and press ENTER. It takes a few moments to format the disc. Caution: If you want to change the disc format, everything recorded on the disc will be erased. 17