JVC DR MV79B Instructions - Page 204

DV Record Audio You need to set this if you have a camcorder using 32kHz/12-bit sound connected to the front panel DV IN jack. Some digital camcorders have two stereo tracks for audio. One is recorded at the time of shooting; the other is for overdubbing after shooting. On the Audio 1 setting, the sound that was recorded while shooting is used. On the Audio 2 setting, the overdubbed sound is used. Auto Chapter During recording, chapter markers are added automatically at fixed intervals. You can set this interval to 5 minutes or 10 minutes. To turn off automatic chapter marking, select [None]. Disc Settings To access to the General Setting. 1. Press HOME and the Home menu appears. 2. Select [Setup] > [Start] and press ENTER. 3. Use v / V to select (Disc) option and press B. Initialize If you load a completely blank disc, the recorder will initialize the disc. • DVD-R: The recorder initialize the disc to Video mode. The recording mode will always be Video mode. • DVD-RW/ DVD+RW/DVD+R/DVD-RAM: The Initialize menu will appears. Select [OK] then press ENTER. DVD-RW disc is initialized to Video mode. Also, you can reformat the DVD-RW/DVD+RW from the Setup menu as below. Caution: If you want to change the disc format, everything recorded on the disc will be erased. Finalize Finalizing 'fixes' the recordings in place so that the disc can be played on a regular DVD player or computer equipped with a suitable DVD-ROM drive. Finalizing a Video mode disc creates a menu screen for navigating the disc. The menu screen of the finalized disc can be accessed by pressing DISC MENU/LIST or TITLE. Caution: Once you have finalized a DVD-R and DVD+R disc, you cannot edit or record anything else on that disc except DVD+RW. However, you can record and edit a DVD-RW disc by choosing [Unfinalize] option. 1. Press HOME and the Home menu appears. 2. Select [Setup] > [Start] and press ENTER. 3. Use v / V to select (Disc) option and press B. 4. Select the [Finalize] option on the setup menu then press B. 5. Press ENTER while [Finalize] is selected. Finalize menu appears. 6. Select [OK] then press ENTER. The Recorder starts finalizing the disc. Notes: • Finalization can take up to 3-4 minutes or more depend- ing on the type of disc, how much is recorded on the disc, and the number of titles on the disc. Tips: • If you load a DVD-RW that has already been finalized, you can 'Unfinalize' it by choosing [Unfinalize] from the Finalize menu. After doing this, you can edit and rerecord onto the disc. • You cannot unfinalize a DVD-R and DVD+R disc. • If [Disc Protect] option is set to [ON], the finalize is not available. To finalize, set [Disc Protect] option to [OFF]. 1. Select the [Initialize] option then press B. [Start] icon is highlighted. 2. Press ENTER. • In case of DVD-RW, use b / B to select a desired Disc Initialize Mode (VR Mode or Video Mode) then press ENTER. • In case of DVD+RW/DVD-RAM, use b / B to select [OK], and press ENTER. It takes a few moments to format the disc. Disc Label Use the Disc Label feature to enter a name for the disc. This name appears when you load the disc and when you display disc information on-screen. • The Disc label can be up to 32 characters long. • For discs formatted on a different Recorder, you will see only a limited character set. 1. Select the [Disc Label] option then press B. [Edit] icon is highlighted. 2. Press ENTER. Keyboard menu appears. To enter characters, see page 44. 22