JVC GM-F420S Instruction Manual - Page 17

Setting the Security Lock When the Security Lock is set to "ON", a password entry screen of the set-up menu appears at at turning on the power. Enter the correct password before starting operations. • Without entering the correct password, you cannot perform any operations except for entering the password and turning off the monitor. To enter a password • To enter a number: press a numerical button. • To move to the next/previous digit: press 3/2. • To delete a number: press CLEAR. • To confirm the entry: press OK. To activate the Security Lock 1 Select "SECURITY LOCK (: OFF)" on the SECURITY LOCK sub menu of the set-up menu. SECURITY LOCK SECURITY LOCK: OFF PASS ID SETTING 2 Press 3. The password entering screen appears. • When shipped from the factory, the password is set to "0000." To change the password, see the right. ENTER PASS ID 3 Enter the password. The Security Lock is set to "ON." • If the Power-on Timer (see the right) is activated, the monitor turns on at the specified power-on time without the password. To deactivate the Security Lock 1 Select "SECURITY LOCK (: ON)" on the SECURITY LOCK sub menu of the set-up menu. 2 Press 3. The password entering screen appears. 3 Enter the password. The Security Lock is set to "OFF." To change the password 1 Select "PASS ID SETTING" on the SECURITY LOCK sub menu of the set-up menu. 2 Press 3. The password entering screen appears. 3 Enter the current password. 4 Enter a new password. 5 Press OK. The cursor moves to the second line. 6 Enter the new password again for confirmation, then press OK. • If the password is different from the one entered in step 4, "PASS ID NG!" appears and the SECURITY LOCK sub menu is displayed. In this case, repeat from step 2. DO NOT forget the password! If you forget the password, consult your dealer. To finish the procedure, press MENU/EXIT repeatedly. Using the timer Setting the clock Set the clock before using the Power-on/off Timer (see below). 1 Select "PRESENT TIME" on the SCHEDULER sub menu of the set-up menu. SCHEDULER NETWORK SETTING PRESENT TIME: SUNDAY 12:05 PROGRAM SET reset 2 Press 3. The clock setting screen appears. PRESENT TIME DAY TIME SUNDAY 03 : 57 3 Press 2 3 to select the item (day, hour, minute) to adjust. 4 Press 5∞ to adjust. To finish the procedure, press MENU/EXIT repeatedly. Setting the Power-on/off Timer You can set the time to turn on/off the monitor for each day of the week. • To use the Power-on/off Timer, you need to set the clock. 1 Select "PROGRAM SET" on the SCHEDULER sub menu of the set-up menu. 2 Press 3. Day √ : Activated / (blank): Deactivated PROGRAM SET DAY CHECK ON TIME SUNDAY ON 00 : 00 / MONDAY ON 00 : 00 / TUESDAY ON 00 : 00 / WEDNESDAY ON 00 : 00 / THURSDAY ON 00 : 00 / FRIDAY ON 00 : 00 / SATURDAY ON 00 : 00 / OFF TIME OFF 00 : 00 OFF 00 : 00 OFF 00 : 00 OFF 00 : 00 OFF 00 : 00 OFF 00 : 00 OFF 00 : 00 On-time Off-time 3 Press 5∞ to select the day, then press 3. 4 Press 5∞ to activate/deactivate the timer. 5 Press 3. 6 Press 5∞ to adjust the hour for on- time. 7 Repeat steps 5 and 6 to adjust the minute for on-time, then hour and minute for off-time. • To set the timer for another day, press MENU/ EXIT to highlight the day, then repeat steps 3 to 7. To finish the procedure, press MENU/EXIT repeatedly. SCHEDULER NETWORK SETTING PRESENT TIME: SUNDAY 12:05 PROGRAM SET reset 17