JVC GM-F420S Instruction Manual - Page 23
Using the LAN system, To join the network, Operation on the web browser
![]() |
View all JVC GM-F420S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Using the LAN system Recommended operating environment Cable Operating system: Microsoft® Windows® XP/Windows® Vista Browser: Microsoft® Internet Explorer® 6.0 and 7.0 Ethernet cable (Category 5 or higher) To join the network For the operation procedure, see page 12. NOTE • About the IP address, sub net mask, default gateway, and DNS server, consult the person in charge of your network. • Before starting the setting, connect the monitor to the network, turn on the monitor, then wait for about 30 seconds. • Two or more PCs cannot log in at the same time. • The PC automatically logs out in about 30 minutes after the last operation. • LAN component of this monitor conforms to 10BASE-T. 1. Select "NETWORK SETTING" on the set-up menu. 2. Set "IP ADDRESS," "SUBNET MASK," "DEFAULT GATEWAY," and "DNS SERVER." 1 Press 5∞ to select the item, then press 3. 2 Enter the number by using 5∞ or number buttons. 3 Press 3 to move to the next item. 4 Press MENU to finish the setting. • To restore the default setting, perform "reset" in "NETWORK SETTING." Basic controls of the monitor (such as turning on/off the power). You can also confirm the status of the monitor. Click to finish the operation. Menu 1 Main Control Menu 2 Menu 3 Menu 4 Motion Sensor Setting General-Purpose Control LAN Setting Log Out Main Control & Status 1 Power On Off 2 Input Select VIDEO RGB DVI Volume Control 3 < > 10 MUTE On Off 4 No Sync. Action OFF 5 Dual Display Mode OFF PIP PBP ID No: 1 ID Address: xx. xx. xx.xx 6 Status Information Power Status: Selected Input: ON VIDEO 7 Signal Status: SIGNAL IN Signal Format: NTSC Self Error Check: OK POWER UNIT: OK TEMP. SENSOR: OK 8 PANEL: OK FAN: OK OTHERS: OK Error Code: 0 Get Status 9 Operation on the web browser Make sure that the monitor, personal computer, and router (or hub) is connected with the network cable, then turn on them. Enable JavaScript of the browser before starting the operation. 1. Start Internet Explorer (6.0 or 7.0) on the computer. 2. Enter the IP address of the monitor to the address bar, then press Enter on the keyboard. The log-in screen appears. GM-F420/470/520 Series Web Control Enter Log In Name : OK 1 Turns on/off the monitor. 2 Selects the input. 3 Adjusts the volume level and activates/deactivates muting. 4 Selects the screen status while no signal is coming in. 5 Selects the Dual Display mode. 6 Displays the ID and IP address of the monitor. 7 Displays the status of the monitor. • Power to the monitor (turned on or off) • Current input • Status of the input signal (coming in or not) • Input signal format 8 Displays the self-check result of the monitor. The status of the power unit, temperature sensor, monitor panel, etc. is indicated. 9 Click to update the status display (6, 7, 8). 3. Click "OK." • No log-in name is set when shipped from the factory. See page 25 to set a log-in name. 4. Click the function tab you want to use. • For details about each function tab, see the right and pages 24 and 25. To finish the operation, click "Log Out." 23
![](/manual_guide/products/jvc-gmf420s-instruction-manual-f5c7802/23.png)