JVC GM-F420S Instruction Manual - Page 29
Specifications, General, Input/output terminals - 42 lcd display
View all JVC GM-F420S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Specifications General Model name GM-F470S GM-F420S Type LCD Monitor Screen size Type 47 wide format Type 42 wide format Aspect ratio 16:9 (Wide format) LCD panel 47 inch wide, active matrix TFT 42 inch wide, active matrix TFT Effective screen size (W x H, Diagonally) 1 039 mm x 584 mm (40 7/8" x 22 15/16"), 1 192 mm (46 7/8") 930 mm x 523 mm (36 9/16" x 20 9/16"), 1 067 mm (42") Number of pixels displayed 1 920 (H) x 1 080 (V) Number of colors displayed 1.07 billion (1 024 colors for each of RGB) Viewing angle (TYP.) 178° (Horizontally), 178° (Vertically) Brightness (TYP.) 700 cd/m2 Contrast ratio (TYP.) 1 000:1 Response time 9 msec Weight 30 kg (66 lbs) 31.2 kg (68.7 lbs) (including the stands) 25 kg (55 lbs) 26.2 kg (57.7 lbs) (including the stands) External dimensions (W x H x D) 1 076 mm x 621 mm (42 3/8" x 24 1/2"), 152 mm (6") 964 mm x 557 mm (38" x 22"), 152 mm (6") When the stand is attached: 1 091 mm x 626 mm (43" x 24 3/4"), 326 mm (12 7/8") When the stand is attached: 979 mm x 562 mm (38 5/8" x 22 1/8"), 326 mm (12 7/8") Power requirements AC 120 V/AC 220 - 240 V, 50 Hz/60 Hz Rated input current 4.9 A (AC 120 V) 3.6 A (AC 220 - 240 V) 4.3 A (AC 120 V) 3.3 A (AC 220 - 240 V) Compatible signals See page 8. Audio power output Internal: 1.7 W + 1.7 W (impedance 8 Ω) External: 6 Ω - 8 Ω, 2.3 W + 2.3 W (at impedance 6 Ω) Speaker Ellipse (70 mm (2 7/8") x 40 mm (1 5/8")) x 2, impedance 8 Ω Operating conditions Temperature: 0°C - 40°C (32°F - 104°F) Relative humidity: 20% - 80% (non-condensation) (Slightly variable depending on ambient conditions for installation.) Notice on transportation This monitor is precision equipment and needs dedicated packing material for transportation. Never use any packing material supplied from sources other than JVC or JVC-authorized dealers. Input/output terminals VIDEO IN Video input VIDEO OUT Video output RGB IN RGB input Video signal Horizontal sync (HD) Vertical sync (VD) RGB OUT RGB input Video signal Horizontal sync (HD) Vertical sync (VD) DVI-D (HDCP) DVI input (compatible with HDCP) AUDIO 1 IN Audio input AUDIO 2 IN Audio input REMOTE RS-232C input RS-485 input RS-485 output LAN AUDIO OUT AUDIO 1 OUT AUDIO 2 OUT EXT. SPEAKER OUT AC OUTLET AC power output BNC terminal x 1 1 V (p-p), 75 Ω BNC terminal x 1 1 V (p-p), 75 Ω D-sub 3-row 15-pin x 1 (RGB is compatible with DDC2B.) G: 1 V (p-p), 75 Ω (including sync) B, R: 0.7 V (p-p), 75 Ω HD: 2.0 V (p-p) to 5 V (p-p), (positive/negative polarity) VD: 2.0 V (p-p) to 5 V (p-p), (positive/negative polarity) D-sub 3-row 15-pin x 1 G: 1 V (p-p), 75 Ω (including sync) B, R: 0.7 V (p-p), 75 Ω HD: 5 V (p-p) (positive/negative polarity) VD: 5 V (p-p) (positive/negative polarity) DVI-D terminal x 1 (Compatible with DDC2B) Pin jack terminal x 2 (L/R) 500 mV (rms), high impedance Stereo mini jack terminal x 1 500 mV (rms), high impedance D-sub 9-pin terminal x 1 (For RS-232C control) RJ-45 pin terminal x 1 (For RS485, MAKE, and TRIGGER control) RJ-45 pin terminal x 1 (For RS485 and IR OUT control) RJ-45 pin terminal x 1 (For LAN control) Pin jack terminal x 2 (L/R) Output impedance 600 Ω Stereo mini jack terminal x 1 Output impedance 600 Ω Speaker output terminal (L/R) Impedance 6 Ω to 8 Ω IEC320 type x 1 Rated output current: 2 A Checking the accessories The following accessories are included with the monitor. Check for them. If any item is missing, please contact the dealer where you have purchased the monitor. • Remote control (RM-C1730) • Batteries (AA/R6) x 2 • Power cord/Power cord holder • Screws for power cord holder • Motion sensor unit Motion sensor x 1, Screw (M4 x 12 mm) x 1, cord cramp x 5 • Stand unit Stand x 2, Screws (M4 x 12 mm) x 6 • Snapping ties x 5 • Covering sticker x 1 Screws for power cord holder Stand unit Snapping ties Motion sensor unit Covering sticker 29