JVC GM-F420S Instruction Manual - Page 24

How to Use External Control (cont.) Setting screen for the motion sensor. • For details about settings of the motion sensor, see page 19. Click to finish the operation. Menu 1 Main Control Menu 2 Menu 3 Menu 4 Motion Sensor Setting General-Purpose Control LAN Setting Motion Sensor Setting Motion Sensor Triggerd Aciton 1 Auto Power On Off Volume Change 2 On Off Change Level: Level 10 3 Input Select On Off Select Input Port: RGB 4 Swap Display On Off Backlight Level Control 5 On Off < > 10 SUSTAIN TIME < > 1 minutes Get Status Log Out 6 7 24 Operation screen for various functions. • The monitor may not operate as commanded in some cases. Always check the monitor status. Click to finish the operation. Menu 1 Main Control Menu 2 Menu 3 Menu 4 Motion Sensor Setting General-Purpose Control LAN Setting Log Out General-Purpose Control FUNCITON 1 MAIN MENU SELECTION NO PARAMETER Feedback InformatIon POWER: ON 3 INPUT: VIDEO SIGNAL FORMAT: NTSC ASPECT: REGULAR COLOR TEMP: MID COMMAND to Send 2 ---> Send COMMAND STATUS SENDING... 1 To turn on the monitor when the motion sensor detects the motion of human, select "ON." 2 To change the volume level when the motion sensor detects the motion of human, select "ON," then select the volume level. 3 To change the input when the motion sensor detects the motion of human, select "ON," then select the input. 4 To switch the main display and sub display of the Dual Display when the motion sensor detects the motion of human, select "ON." 5 To change the brightness of the back light when the motion sensor detects the motion of human, select "ON," then select the brightness level. 6 Specify the period* for the monitor to keep the specified operation. 7 Loads the current settings from the monitor. * Counted from when the sensor detects a motion of human at the last time. 1 Selects the function to operate ("FUNCTION"), then its setting value ("SELECTION"). Ex.: When changing to the aspect to "FULL" FUNCTION ASPECT (DIRECT) ∞ SELECTION 3 Displays the status of the monitor. • Power to the monitor (turned on or off) • Current input • Input signal format • Aspect setting • Color temperature setting FULL ∞ • If the selected function does not have the setting values, "NO PARAMETER" is displayed for "SETTING." 2 Displays the command for the operation selected in 1. Click "Send" to send the command to the monitor. "SENDING" appears in the "COMMAND STATUS" window while the command is being sent.