JVC GR D770 Instructions - Page 21

Normal Playback VIDEO/ VOL. +/- MEMORY BLANK Lock Button 6 ¡ 1 7 MENU Speaker Power Switch 1 Load a cassette. (੬ pg. 16) 2 Set the VIDEO/MEMORY Switch to "VIDEO". 3 Set the Power Switch to "PLAY" while pressing down the Lock Button located on the switch. VIDEO PLAYBACK EN 21 NOTES: ● The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV. (੬ pg. 23) ● If Stop mode continues for 5 minutes when power is supplied from a battery, the camcorder shuts off automatically. To turn the camcorder on again, push back and pull out the viewfinder again or close and re-open the LCD monitor. ● When a cable is connected to the AV connector, the sound is not heard from the speaker. HDV Appears when pictures recorded in the HDV format are detected. The pictures in the HDV format cannot be played back with this camcorder. Still Playback Pauses during video playback. 1) Press 6 during playback. 2) To resume normal playback, press 6 again. ● If still playback continues for more than about 3 minutes, the camcorder's Stop mode is automatically engaged. RECORDING & PLAYBACK SET ● The above screen (referring to the control lever (੬ pg. 7)) will be displayed for approx. 3 seconds on the LCD Monitor. Operation To select 6 Move the control lever up. 7 Move the control lever down. ¡ Move the control lever right. 1 Move the control lever left. 4 To start playback, press 6. 5 To stop playback, press 7. ● During Stop mode, press 1 to rewind, or ¡ to fast-forward the tape. ● Press SET to display the guide operation screen. To control the speaker volume Slide the Power Zoom Lever (VOL. +/-) towards "+" to turn up the volume, or towards "-" to turn down the volume.