JVC GR D770 Instructions - Page 32

32 EN MENUS FOR DETAILED ADJUSTMENT DISPLAY The "DISPLAY" settings (except "CLOCK ADJ.", "16:9 OUTPUT" and "BRIGHT") are effective only for shooting. ON SCREEN LCD: Keeps the camcorder's display (except the date, time and time code) from appearing on the connected TV screen. [LCD/TV]: Makes the camcorder's display appear on screen when the camcorder is connected to a TV. DATE/TIME [OFF]: The date/time does not appear. ON: The date/time is always displayed. CLOCK ADJ. ੬ pg. 15, "Date/Time Settings" TIME CODE* [OFF]: Time code is not displayed. ON: Time code is displayed on the camcorder and on the connected TV. Frame numbers are not displayed during recording. (੬ pg. 20) * Available only when the VIDEO/MEMORY Switch is set to "VIDEO". 16:9 OUTPUT To enable your tv to display images in 16:9 wide mode, set the tv screen size correctly. 4:3 TV: For TV with an aspect ratio of 4:3. [16:9 TV]: For TV with an aspect ratio of 16:9. BRIGHT ੬ pg. 15, "Brightness Adjustment Of The Display" MELODY OFF: Even though not heard while shooting, shutter sound is recorded on the tape. [ON]: A melody sounds when any operation is performed. It also activates the shutter sound effect. (੬ pg. 24, 34) PRIORITY [LCD]: The image is displayed on the LCD monitor when the viewfinder is pulled out while the LCD monitor is opened. FINDER: The image is displayed in the viewfinder when the viewfinder is pulled out while the LCD monitor is opened. DEMO MODE OFF: Automatic demonstration will not take place. [ON]: Demonstrates certain functions such as Wipe/Fader and Effects, etc., and can be used to confirm how these functions operate. Demonstration starts in the following cases: ● When the Menu Screen is closed after "DEMO MODE" is turned "ON". ● With "DEMO MODE" set to "ON", if there is no operation for about 3 minutes after the Power Switch is set to "REC". ● Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 3 minutes after that, the demonstration will resume. NOTES: ● If a cassette is in the camcorder, the demonstration cannot be turned on. ● "DEMO MODE" remains "ON" even if the camcorder power is turned off. SYSTEM CAM RESET The "SYSTEM" functions which are set when the Power Switch is set to "REC" are also applied when the Power Switch is set to "PLAY". [CANCEL]: Does not reset all settings to the factory-preset. EXECUTE: Resets all settings to the factorypreset. LANGUAGE / / / [ENGLISH] / FRANCAIS / ESPAÑOL / PORTUGUÊS The language setting can be changed. (੬ pg. 14)