JVC GR D770 Instructions - Page 28

28 EN ADDITIONAL FEATURES FOR D.S.C. To Print By Selecting Still Images And To Reset The Number Of Prints Number Of Prints 1 Perform steps 1 - 3 in "To Print All Still Images (One Print For Each)" (੬ pg. 27). 2 Select "CURRENT", press SET or 2. The DPOF screen appears. DPOF SHEETS 3 Press 1 or 2 to select the desired file. 02 RETURN 1 Perform steps 1 - 3 in "To Print All Still Images (One Print For Each)" (੬ pg. 27). 2 Select "RESET", press SET or 2. The DPOF screen appears. 3 Select "EXECUTE", press SET. ● To cancel selection, select "RETURN". ● The number of prints is reset to 0 for all still images. CAUTION: While performing the above, never disconnect power, as this may cause the memory card to be corrupted. Select 4 Press 4 or 3 to select the number indication (00), and press SET. 5 Select the number of prints 1 Select by pressing 3 to increase the number, or 4 to decrease the number, and press SET. NOTE: When the image is printed from the printer, a black bar appears at the bottom of the screen. This is not a malfunction. By recording with "DIS" de-activated (੬ pg. 30) this can be avoided. Initializing A Memory Card 2 SET ● Repeat steps 3 through 5 for the desired number DPOF of prints. SHEETS ● The number of prints can be set up to 15. 02 ● To correct the number of prints, select the image again and change the number. 6 Select "RETURN", press SET. The "SAVE?" DPOF appears. SAVE? ● If you did not change any settings in step 3 through 5, the DPOF EXECUTE CANCEL Menu reappears. 7 Select "EXECUTE", press SET. ● To cancel selection, select "CANCEL". You can initialize a memory card any time. After initializing, all files and data stored in the memory card, including those which have been protected, are cleared. 1 Perform steps 1 - 3 in "Normal Playback Of Images" (੬ pg. 25). 2 Press MENU. 3 Select "FORMAT", press SET 1 Select or 2. The FORMAT screen appears. ● Press 1 whenever you want to return to the previous menu screen. 2 SET 4 Select "EXECUTE", press SET.The memory card is initialized. FORMAT ERASE ALL EXISTING DATA? ● When initialization is finished, "NO IMAGES EXECUTE CANCEL STORED" appears. ● To cancel initialization, select "CANCEL".