JVC KW NX7000 Instructions - Page 5

ENGLISH INTRODUCTION Before operations Map screen AV screen Touch panel Monitor panel Touch panel Monitor panel In the explanation, operating buttons shown on the touch panel are indicated inside [ ]. For details on the touch panel operations, see each section. Features of the illumination Monitor panel buttons The lights of the monitor panel buttons are turned off when no operation is done for about 5 seconds. They are turned on again in the following cases: - When you touch the touch panel or move your hand nearby* - When you use the remote controller - When a call/Text Message comes in (for Bluetooth cellular phone) * Depending on the setting. (☞ page 108) The lights of the monitor panel buttons are always turned on in the following cases: - While operating buttons are displayed on the map screen. - While AV menu screen is displayed. - While screen is displayed. - While menu is displayed. - When is set to . (☞ page 108) Screen While the unit is turned on, you can turn off the screen by holding DISP. [Hold] The screen is turned on again in the following cases: - When you touch the touch panel - When you press MAP on the monitor panel or press DISP - When a call/Text Message comes in (for Bluetooth cellular phone) - When the signal from the rear view camera comes in 5 INTRODUCTION