JVC KW NX7000 Instructions - Page 83

ENGLISH You can enter [0] - [9] only. • [BS]: Erases the character before the cursor. • [Del]: Erases the character on the cursor. • [Enter]: Confirms the entry. 5 Operate the Bluetooth device to connect while "Open..." is displayed on the screen. Enter the same PIN code (as entered in the above step) on the device to be connected. Now connection is established and you can use the device through the unit. To connect a special device 1 Press [ ]. 2 Press [Bluetooth]. 3 Press [Special Device]. The unit displays the list of the preset devices. 4 Select a device you want to connect. 5 Use (or ) to connect. The device remains registered even after you disconnect the device. Use (or activate ) to connect the same device from next time (☞ page 111). To register using • Make sure "NEW DEVICE" is selected. If not, press [5] or [∞] to select it. 1 Press [ ]. 2 Press [Bluetooth]. 3 Press [Search]. The unit searches for available devices and displays the list of them. (If no available device is detected, "Device Unfound" appears.) 4 Select a device you want to connect. 5 Enter the specific PIN code of the device to the unit. • Refer to the instructions supplied with the device to check the PIN code. 6 Operate the Bluetooth device to connect while "Connecting..." is displayed on the screen. To connect/disconnect a registered device 1 Select "Bluetooth PHONE" or "Bluetooth AUDIO," then select a registered device you want to connect/disconnect. 2 Press [ ]. 3 Press [Bluetooth]. 4 Press [Connect] or [Disconnect]. • Select to connect the selected device. • Select to disconnect the selected device. To delete a registered device 1 Select "Bluetooth PHONE" or "Bluetooth AUDIO," then select a registered device you want to delete. 2 Press [ ]. 3 Press [Bluetooth]. 4 Press [Delete Pairing]. Confirmation screen appears. Press [Yes]. Now connection is established and you can use the device through the unit. 83 AV OPERATIONS