JVC KW-V25BT Instruction Manual America - Page 64
Bluetooth
View all JVC KW-V25BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Troubleshooting "SXM Channel Locked" appears. The selected channel has been locked by the parental controls. Enter the unlock code when you are asked. "SXM Incorrect Lock Code" appears. The selected channel is a mature or parental lock channel, and locked by the parental lock or user lock code. Enter the correct lock code. * Only for KW-V250BT/KW-V25BT/KW-V350BT Region 1. Bluetooth Phone sound quality is poor. Reduce the distance between the unit and the Bluetooth mobile phone. Move the car to a place where you can get a better signal reception. The sound is interrupted or skipped while using a Bluetooth audio player. Reduce the distance between the unit and the Bluetooth audio player. Disconnect the device connected for Bluetooth phone. Turn off, then turn on the unit. (When the sound is not yet restored) connect the player again. The connected audio player cannot be controlled. Check whether the connected audio player supports AVRCP (Audio/Video Remote Control Profile). The Bluetooth device does not detect the unit. Search from the Bluetooth device again. The unit does not pair with the Bluetooth device. For devices compatible with Bluetooth 2.1: Register the device using a PIN code. (Page 35) For devices compatible with Bluetooth 2.0: Enter the same PIN code for both the unit and target device. If the PIN code of the device is not indicated in its instructions, try "0000" or "1234." Turn off, then turn on the Bluetooth device. Echo or noise occurs. Adjust the microphone unit position. Adjust the echo volume or noise reduction volume. (Page 36) The unit does not respond when you try to copy the phone book to the unit. You may have tried to copy the same entries (as stored) to the unit. "Connection Error" appears. The device is registered but the connection has failed. Connect the registered device. (Page 35) "Please Wait..." appears. The unit is preparing to use the Bluetooth function. If the message does not disappear, turn off and turn on the unit, then connect the device again (or reset the unit). "No Voice Device" appears. The connected mobile phone does not have a voice recognition system. "No Data" appears. No phone book data is contained in the connected Bluetooth phone. "Initialize Error" appears. The unit has failed to initialize the Bluetooth module. Try the operation again. "Dial Error" appears. Dialing has failed. Try the operation again. "Hung Up Error" appears. The call has not ended yet. Park your car, and use the connected mobile phone to end the call. "Pick Up Error" appears. The unit has failed to receive a call. The Bluetooth connection between the Bluetooth device and the unit is unstable. Delete the unused registered Bluetooth device from the unit. (Page 36) 62 ENGLISH