JVC KW-Z1000W Instruction Manual America - Page 73
Equalizer Control, When Speaker network is set to 3-way
View all JVC KW-Z1000W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
When Speaker network is set to 3-way: 2 1 2 ■■ [Speaker] You can select a speaker type and its size to get the best sound effects. If you have no speakers, select "None". When the speaker type and size are selected, the speaker crossover network is set automatically. ■■[FREQ] (High Pass) High Pass Filter adjustment. (Only for High Pass) ■■[FREQ] (Low Pass) Low Pass Filter adjustment. (Only for Low Pass) ■■[HPF FREQ], [LPF FREQ] (Only for Band Pass) Band Pass Filter adjustment. ■■ [Slope]*1 *2 Set a crossover slope. ■■ [Gain] Set the gain of each speaker. ■■[Phase Inversion] Set the phase of tweeter, mid range, and woofer output. Check [Phase Inversion] to shift the phase 180 degrees. *1 Only when "LPF FREQ"/"HPF FREQ" (Band Pass) is set to a mode other than "Through". *2 Only when "FREQ" (Low Pass) is set to a mode other than "Through". NOTE • For how to switch to the 3-way speaker system, see 3-way speaker system setup (P.71). Controlling Audio Equalizer Control You can adjust equalizer by selecting the optimized setting for each category. 1 Press the [ ]/[ ] button. 2 Touch [ ]. 3 Touch [Audio]. hhAudio screen appears. 4 Touch [EQ / SW Level]. 5 Touch the screen and set the Graphic Equalizer as desired. ■■Gain level (area in dotted frame) Adjust the gain level by touching each frequency bar. You can select a frequency bar and adjust its level by [R], [S]. ■■[ALL SRC] Apply the adjusted equalizer curve to all sources. Touch [ALL SRC] and then touch [OK] on the confirmation screen. ■■ [Memory] Saves the adjusted equalizer curve as "User1" to "User4". (P.74) ■■ [Initialize] Initialize (flatten) the current EQ curve. ■■[Bass EXT] (Bass Extend Settings) When turned on, the frequencies lower than 62.5 Hz is set to the same gain level (62.5 Hz). ■■[SW Level] Adjust the subwoofer volume. This setting is not available when Subwoofer is set to "None". See Speaker / X'over setup (P.72). ■■[Pop]/[Hip Hop]/[R&B]/[Jazz]/[Classical]/ [Hard Rock]/[Flat]/[Bass Boost]/[User1]/ [User2]/[User3]/[User4] Recall the preset EQ curve. English 73