JVC MXDVA5 Instructions - Page 29

Continued Programming the Playing Order of the Tracks-Program Play You can arrange the track playback order before you start playing. You can program up to 20 steps. • Before making a program, make sure that the TV is turned on and the correct input is selected on the TV. On the remote control ONLY: 1 Load a disc. • If the current playing source is not the DVD player, press DVD1, DVD2 or DVD3 on the unit to select the disc you want to play, then 7 before going to the next step. 2 Press PLAY MODE. The PROGRAM MENU screen appears on the TV screen. • Each time you press the button, program mode turns on and off. PROGRAM MENU SELECT: ENTER TRACK 1 -- 2 -- 3 -- 4 -- 5 -- PREVIOUS RETURN : 3 Press ENTER. TRACK 6 -- 7 -- 8 -- 9 -- 10 - - NEXT PLAY SETUP : FINISH PROGRAM MENU SELECT: ENTER TRACK 1 -- 2 -- 3 -- 4 -- 5 -- CHOOSE : 1-17 PREVIOUS RETURN : TRACK 6 -- 7 -- 8 -- 9 -- 10 - - NEXT PLAY SETUP : FINISH Track numbers you can select in the next step 4 Press Cursor 3 or 2 (or number button) to select a track number, then ENTER. PROGRAM MENU TRACK 1 7 2 -- 3 -- 4 -- 5 -- CHOOSE : 1-17 PREVIOUS RETURN : SELECT: ENTER TRACK 6 -- 7 -- 8 -- 9 -- 10 - - NEXT PLAY SETUP : FINISH 5 Repeat step 4 to program other tracks you want. • After 10 steps are programed, "NEXT «" is selected (highlighted). If you want to program more steps, press ENTER. 6 Press DVD 6. The tracks are played in the order you have programed. To stop during play, press 7. The PROGRAM MENU screen appears on the TV screen. • If you press DVD 6 while this screen is shown, the unit starts program play. PROGRAM MENU TRACK 1 7 2 6 3 9 4 13 5 11 CHOOSE : 1-17 PREVIOUS RETURN : SELECT: ENTER TRACK 6 1 7 -- 8 -- 9 -- 10 - - NEXT PLAY SETUP : FINISH To exit from program mode, press PLAY MODE. The PROGRAM MENU screen goes off, and the opening screen appears. DVD/Video CD/CD PLAYER (The program you made is still kept in memory.) • If you press DVD 6 while this screen is shown, the unit starts normal playback. To erase the stored program, eject the carrousel by pressing 0. • If you perform the following operations, the program is also erased-turning off the unit, changing the source, or skipping a disc. - 26 -